Mollificio Valli: New photovoltaic systemPublished:16/06/2013
The spring manufacturer Mollificio Valli has installed an electrical energy production system based on the photovoltaic conversion. It is connected to the network and is characterized by a power whose highest peak is 29 kWp in standard condition of temperature and irradiation (STC). The system makes use of thin film technology of amorphous silicon triple connection, is made with flexible photovoltaic rolled sections UNI SOLAR (power 68/144 Wp) integrated... Read newsGMP Slovakia @ Wire Russia Published:16/06/2013
Dear Ladies and Gentlemen, GMP Slovakia, the supplier of spools, reels and drums for wire and cable industry, would be definitely glad to welcome you at the next show in Moscow on June 25 - 28, 2013.
Visit booth # 7-5 D14, GMP's team will be happy to meet you! Read newsWire & Plastic Machinery Corp.: 250 + Cleaned and Painted Machines in Stock and Ready to Ship!Published:12/06/2013
The US-based wire, cable, and optical fiber equipment supplier Wire & Plastic Machinery is excited to announce a new feature on its website that allows searching by machines that have already been cleaned, painted, and in some cases mechanically tested under power or fully reconditioned.
The Cleaned & Painted category can be accessed on the Inventory page. Be sure to try the improved grid view and the ability to view... Read newsMoscow ready to host WIRE & TUBE Russia 2013.Published:11/06/2013
An important date with the Russian wire and metal working industry is approaching. The biennal event WIRE Russia 2013 is going to take place from June 25 to 28, together with other three shows: Metallurgy Litmash, Tube Russia, Aluminium Non-Ferrous 2013. 247 international exhibitors for the wire sector and about 300 for the other three fairs are going to exhibit at the Krasnaya Presnya Exhibition Centre in Moscow. We take this opportunity to tell our customers and visitors that this week the operational phase in the construction of Expometals's Russian release went into full swing. According to the plans, it should be fully online by the end of 2014.All the companies already on expometals will get the opportunity to have their online stand – their showcase on this portal – in Russian, too, besides English, Spanish, Italian, German, French. All of this included in the standard year-time membership. We remind you that in the last three month Expometals.net reached 19,835 unique visitors (certified by Google Analytics). Don't waste your precious time, subscribe now and take advantage of the countless webtools that the portal puts at your disposal. While waiting for the Russian section to come, we propose you the list of the exhibitors of WIRE Russia. Following companies are the ones that exhibit their products – and index them on the international search engines – through this portal, Expometals.net. Click on "Read news" for further information. Read newsFIB BELGIUM and PYROTEK sign an exclusive global distributor agreement for the wire industryPublished:10/06/2013
Pyrotek Inc. has contracted with FIB Belgium s.a. to be the exclusive global distributor for its new model overflow transfer system (OTS) and related parts and services within the wire industry.
Founded in 1936, Brussels-based FIB manufactures equipment for various sectors and is a leading supplier of batch heat-treatment installations and continuous lines for wire patenting, annealing, galvanizing and oil-tempering. It also supplies heating equipment to the glass, ceramic, heat treatment and non-ferrous industries. Read newsManufacturer of chemicals Condoroil presents new corporate websitePublished:10/06/2013
Condoroil, specializing in chemical products, cleaners, degreasers and lubricants, has recently launched its new corporate website in English and Italian. As a new corporate image the company chose nature, showing the commitment to offer more environmentally friendly products and safer chemicals for the operator. Condoroil offers chemical products for following industries: flat products, aluminium coils, carbon steel, coil coating, copper and zinc, stainless steel and titanium, long products, tubolar products, industrial painting, water treatment, maintenance and metalworking. Read newsCOMETO presents the wire pay-off SVOPublished:09/06/2013
 Cometo, specializing in equipments for wire and cable, like wire straighteners, traverse units, rotating die-holders and wire feeders, presents today the wire pay-off model SVO suitable for both round and shaped wires up to a maximum diameter of 10mm.
The maximum load is 1.000 kg. Read newsButti presents its large sized containers for big industriesPublished:07/06/2013
 The company Butti, leader in building and workshop equipment, presents its large sized container with openable bottom for the collection of industrial processing scraps.
The container is forkable for the handling and lifting through forklifts.
The standard capacity is 8 cubic meters, the capacity 3000 kg.
Special products can be manufactured on request...
Read newsEASYDUR MULTIVISION GRIND - Instrument for finding grinding defects on springsPublished:06/06/2013
Easydur, which has been manufacturing measuring and controlling instruments for compression, tensile, torsion, hardness tests, vision systems for over 20 years, presents now "MULTIVISION GRIND", the instrument for finding grinding defects on springs, a patented system with two cameras fitted on grinding machines to detect grinding defects on both the top and bottom ends of springs. The system can also be used for tests off-line... Read newsFlyer Bows for the wire processing industry.
The BackBone design by Keir Manufacturing Published:05/06/2013
 KEIR Manufacturing’s proposition has always been to realize flyer bows providing longer operating life, less machine downtime, lower maintenance expenses, and reduced energy consumption.
The aerodynamic BackBone design functions at lower power consumption (up to 40% less energy) and higher TPM, resulting in improved wire quality and a reduction in bow breakage.
The BackBone flyer bow is shaped like a wing to obtain an improved aerodynamics and a low Cw factor.
The wear strip was eliminated and replaced by...
Read newsTECNOFIL Spa: Automatic reworking machine for tungsten carbide diesPublished:04/06/2013
 Tecnofil S.p.A. has been designing and manufacturing wire-working machinery since 1994, offering cost-effective solutions to the wire industry.
The latest developed machine is the ADR-4, a machine for full automatic reworking of Tungsten Carbide dies, using CNC technology for the highest productivity, reliability and die geometry precision.
The machine reworks tungsten carbide dies, processing both semi-finished dies and used dies.
Die diameter range: 0.40 - 6.00 mm Read newsRivets, screws and special fasteners: Piloni releases new cataloguePublished:03/06/2013
The company "Piloni" based in Lecco (Italy), manufacturing rivets, screws and special fasteners by cold forming of metal wires, has released a new catalogue, available for download, in pdf format. Piloni's factory (surface 10.000 m of which 5.500 covered) is placed in one of the greatest italian industrial distict, less than an hour by car or train from Milan... Read newsPROFIBUS DP and PROFINET IO – the intelligent communication interfaces of ZUMBACHPublished:02/06/2013
 For years the PROFIBUS DP and PROFINET IO industrial fieldbus standards have been used successfully for communication between devices of different manufacturers in automated production lines. With a new update to its PROFIBUS DP interface, ZUMBACH is raising the usability of its devices to a new level.
On the left: Selection of gauges with Profibus/Profinet interface Read newsTIS srl thanks all the visitors of Stainless Steel Brno 2013.Published:28/05/2013
TIS srl thanks all the visitors of Stainless Steel Brno 2013, last 14th and 15th May, in Czech Republic. With this exhibition, TIS srl, has renewed its offer as Italian manufacturer of TIG welded stainless steel tubes, from Ø 8 till 60.3 mm diameter, with a production park machine based on 5 lines of production and 2 lines for polish and mirror polish the tubes. With this exhibition, TIS srl has introduced to all potential customers its new... Read newsCarlo Salvi at the Fastener Expo Shanghai 2013Published:27/05/2013
Carlo Salvi, one of the leading worldwide suppliers of cold headers and machines for the fasteners industry, informs all its customers that it will attend the Fastener Expo Shanghai 2013, which will held at the Shanghai World Expo Exhibition & Convention Center, China, from June 20th to 22nd, 2013. Read newsBecome an agent of "Eredi Mario e Antonio Airoldi sas"!Published:26/05/2013
The company "Eredi Mario e Antonio sas", specializing in cold wire and wire rod rolling is looking for sellers/agents on a national and international field.
Aiming at a commercial expansion, Airoldi is able to recognize and satisfy, professionally and economically speaking, even qualified candidates that are already working... Read newsStrip & Plate Rolling. New Multi-Stand Mill ENNE130 by InvimecPublished:23/05/2013
The unique design of the new Multi-Stand Mill ENNE130 made by Invimec gives extreme flexibility and power together with compact dimensions and very easy use.
It is suitable for the cold rolling of plates, strips, flattened wire and bars. Read news
Expowire - Expotube - Expofastener - Expocoils - Expometals
|
 In this section you will find handouts, technical documentation, calculations and tables that were previously on the first version of this site which at the time was called trafilatura.it. The transfer of all documentation will take place over the coming months. |