EASYDUR presents BOGIE PORTAL, for compression tests on railway bogies

     BOGIE PORTAL     TECHNICAL DATA   HEIGHT/WIDTH/DEPTH 3.964/5.200/6.120 mm PRESSER CENTRE DISTANCE from 1.200 to 3.000 mm ELECTRIC AXLE MAX STROKE  500 mm WORKING TEST HEIGHT 2.000 mm WORKING TEST WIDTH 4.000 mm MINIMUM DIVISION  0.005  mm MAX LOAD 20 + 20 T MINIMUM DIVISION 0.6 Kg CHASSE OFFSET 50x50 mm DATA ACQUISITION SPEED 1000 Hz       Portal with fixed crossbar 20+20 tonnes for compression tests on bogies. Equipped with two electric or hydraulic pressers, with optional "chasse" test device.   MAIN CHARACTERISTICS   - The software is set up to insert in the worksheet also the geometric data of the bogie under load, measured manually or automatically by sensors and measuring cameras, to check the different heights and widths of the bogie.   - Possibility of inserting load cells to check the force on the wheel axles and of inserting a third horizontal piston to check also the front or lateral thrusts.   - Manual or automatic opening of the pressers, possibility of performing also fatigue tests with the hydraulic system.   - Possibility of performing tests on railway springs, using a suitable support.