Bongard Machines GmbH & Co. KG


Ohlweg, 7
Fröndenberg -
Germany (58730)
Tel: +49 2378 9155
Fax: +49 2378 915300
Contact person:

News in detail

Second-hand machines on sale: stranders, annealing plants and much more


Published: - 11/03/2019 Author: Simonati, Programming office
Second-hand machines on sale: stranders, annealing plants and much more

Browse Bongard's latest acquisitions as regards second-hand wire and cable processing machinery and equipment.

The Germany-based BONGARD MACHINES GMBH & CO. KG has been specialising in purchasing and selling used equipment, from single machines to complete manufacturing plants, since 1959.

 

NIEHOFF D 1251 double twist bunching machine 
10878

up to now used for: flexible conductor
twists per minute: 2,000
take-up spool flange Ø: 900 - 1.250 mm
lay length max: 500 mm
speed max: 300 m/min
Details
 
 

NIEHOFF D 631 double twist bunching machine 
10883

up to now used for: Cu, bare
twists per minute: 6,500
take-up spool flange Ø: 630 mm
lay length max: 100 mm
speed max: 300 m/min
Details
 
 

BZK VM 1000 double twist bunching machine 
10876

up to now used for: Al wire
twists per minute: 3,000
take-up spool flange Ø: 800 - 1.000 mm
cross section of core max: 35 mm²
lay length max: 250 mm
Details
 
 

SKET ZLWGM 400 multiwire drawing machine 
10875

up to now used for: Cu wire
no. of wires: 8
no. of drafts: 21
inlet wire Ø max: 1.8 mm
finished wire Ø min: 0.2 mm
Details
 
 

HERBORN-BREITENBACH M=-25/1+GV-16/2 straight-line wire drawing machine 
10870

up to now used for: low carbon wire
no. of drafts: 3
inlet wire Ø max: 7 mm
shaft of block: vertical
motor power: 3 x 45 kW
Details
 
 

KOCH KHZ 4500 straight-line wire drawing machine 
10837

up to now used for: Steel wire with 350 N/mm² strength
no. of drafts: 2
inlet wire Ø max: 17 mm
finished wire Ø min: 5 mm
drawing capstan Ø: 900 mm
Details
 
 

STOLBERGER SVL 12/450 tubular strander 
10847

up to now used for: steel wire, high carbon steel
spool flange Ø max: 450 mm
single wire Ø max: 3 mm
strand / conductor Ø max: 6 mm
Details
 
 

NIEHAUS SR 8+1 /650 tubular strander 
10843

up to now used for: high carbon steel wire, reinforced concrete wire
single wire Ø max: 6 mm
core Ø max: 25 mm
lay length max: 220 mm
Details
 
 

WAFIOS HJGM 200 field fence netting machine 
10836

knot type: Hinge Joint
wire Ø min: 2 mm
wire Ø max: 3.8 mm
weaving width max: 2000 mm
no. of line wires: max. 20
Details
 
 

ITAL / NOKIA-MAILLEFER Isolier- und Mantelanlage 
10898

up to now used for: PE, FRNC
suitable for: Cable-Ø over jacket max: 22 mm
Cable-Ø under jacket min: 2 mm
cable Ø min: 2 mm
cable Ø max: 22 mm
Details
 
 

NOKIA-MAILLEFER Aderextrusionslinie 
10895

up to now used for: FRNC-Seil, EPR-Seil, PUR-Seil, PE-Seil, PVC-Seil, XLPE-Seil, EPDM-Seil
cross section of core: 0,75 - 16,00 mm²
no. of extruders: 2
Details
 
 

NOKIA-MAILLEFER jacket extrusion line for LWL cable 
10884

suitable for: covering of cables with termoplastic inclusiv printing
cable Ø min: 3.3 mm
cable Ø max: 35 mm
speed max: 100 m/min
Details
 
 

NIEHAUS cage strander with backtwist 
10880

up to now used for: insulated cores
spools per cage: 1 + 6 + 12 + 18
spool flange Ø max: 400 mm
single wire Ø max: 4 mm
cable Ø max: 35 mm
Details
 
 

EVG QC7 / 102 RV / PV mesh welding line 
10869

line wire Ø pre-cut max: 14 mm
mesh width max: 2500 mm
transformer capacity (50% duty ratio): 1600 kVA
welding width max: 2400 mm
Details
 
 

NIEHOFF MMH121.E2.1.A.14.2618 multiwire drawing machine 
10635

up to now used for: Cu wire, annealed
no. of wires: 14
no. of drafts: 18
inlet wire Ø max: 2.59 mm
finished wire Ø min: 0.32 mm
Details
 
 

BAREMO S 850 rewinding line 
10852

up to now used for: Aldrey, Stalum, steel wire
suitable for: rewinding of wire from big spools or coils to small spools
wire Ø min: 2 mm
wire Ø max: 5.2 mm
Details
 
 

BEKAERT CDZ straight-line wire drawing machine 
10850

up to now used for: steel wire, low and medium carbon steel
no. of drafts: 10
finished wire Ø min: 0.8 mm
drawing capstan Ø: 300 mm
speed max: 25 m/s
Details
 
 

KOCH KGT 2500/1 - 1600/2 straight-line wire drawing machine 
10908

up to now used for: low carbon wire
no. of drafts: 3
inlet wire Ø max: 11 mm
finished wire Ø min: 3.9 mm
drawing capstan Ø: 700 / 600 mm
Details
 
 

STEULER St 3a tinning line 
10835

up to now used for: Cu wire, soft
suitable for: for coating Cu wire with nickel
wire Ø min: 1 mm
wire Ø max: 1.8 mm
current power tinning: 4.000 A
Details
 
 

NIEHOFF M 450 rod breakdown drawing machine 
10831

no. of drafts: 15
inlet wire Ø max: 8 mm
finished wire Ø min: 1 mm
speed max: 40 m/s
Details
 
 

EBNER HOg 330/290 St-h2-d bell-type annealing plant 
10826

up to now used for: wire
useful Ø annealing pots: 3100 mm
mode of heating: natural gas
annealing temperature: 500 - 800 °C
useful height annealing pots: 2900 mm
Details
 
 

NIEHAUS SVM 36+1/250 tubular strander 
10810

up to now used for: steel wire
total no. of bobbins: 36
spool flange Ø max: 250 mm
single wire Ø max: 2 mm
lay length max: 60 mm
Details
 
 

WAFIOS Nailmaster nail making machine 
10790

no. of nails / minute: 1,400
wire Ø min: 2.4 mm
wire Ø max: 3.8 mm
nail length min: 50 mm
nail length max: 100 mm
Details
 
 

BEKAERT RTA hexagonal mesh weaving machine 
10785

wire Ø min: 0.7 mm
wire Ø max: 1 mm
pitch max: 25 mm
weaving width max: 3000 mm
take-up: manufacture: Bekaert, mesh width max.: 2.200 mm
Details
 
 

SAMP BM 800 D double twist bunching machine 
10663

up to now used for: flexible conductor
twists per minute: 5,000
take-up spool flange Ø: 630 / 800 mm
single wire Ø max: 0.6 mm
cross section of core max: 16 mm²
Details
 
 

KOCH KGT 1600/4 + KEWS + KHS straight-line wire drawing machine 
10910

up to now used for: low carbon wire
no. of drafts: 4
inlet wire Ø max: 8 mm
finished wire Ø min: 3.5 mm
speed max: 5 m/s
Details
 

Contact

Bongard Machines GmbH & Co. KG
Ohlweg 7
58730 Fröndenberg
Germany

Telefon: +49 (2378) 915-5
Fax: +49 (2378) 915-300
info@bongard.de