Bongard Machines GmbH & Co. KG


Ohlweg, 7
Fröndenberg -
Germany (58730)
Tel: +49 2378 9155
Fax: +49 2378 915300
Contact person:

News in detail

Second hand stranders and wire drawing machines - Bongard's December acquisitions


Published: - 19/11/2018 Author: Simonati, Programming office
Second hand stranders and wire drawing machines - Bongard's December acquisitions

Automatic spoolers, mesh welding lines and straightening machines: browse Bongard's latest acquisitions as regards second-hand wire and cable processing machinery and equipment.

The Germany-based BONGARD MACHINES GMBH & CO. KG has been specialising in purchasing and selling used equipment, from single machines to complete manufacturing plants, since 1959.

Bongard will be present at wire India 2018, booth no. I89. The company awaits you in Mumbai from 27 to 29 december 2018.

 

NIEHOFF M 450 rod breakdown drawing machine 
10831

total no. of dies: 15
inlet wire Ø max Cu: 8,0 mm
inlet wire Ø max Al: 12,5 mm
inlet wire-Ø max. AL Aldrey: 9,52 mm
inlet tensile strength: 250 Cu (soft) 400 Cu (hard) AL 80 Aldrey 180 N/mm²
Details
 
 

CABALLE 1+12+20 planetary strander 
10827

spools per cage: 12 + 20
spool flange Ø max: 630 mm
cable Ø max: 40 mm
suitable for: fiber optic ropes and cables: OPGW underwater and sensor cable
up to now used for: Galvan steel, Stalum, Aldrey
Details
 
 

WAFIOS HJGM 200 hinge joint wire netting machine 
10836

wire Ø max: 3,8 mm
weaving width max: 2000 mm
Type knot: hinge joint
wire Ø min: 2,0 mm
Line wir distance: 1 1/2 "
Details
 
 

SLR WELDCRAFT electrode extrusions press 
10834

up to now used for: electrodes
wire Ø min: 2
wire Ø max: 4 mm
electrode length: 350 - 450 mm
block length: 250 mm
Details
 
 

HAGEN & FUNKE take-up 
10821

reel flange Ø max: 1600 mm
reel flange Ø min: 800 mm
useful reel width max: 785 mm
type of drive: AC motor
motor power: 10 kW
Details
 
 

MÜLLER KVM 8X650 tubular strander 
10811

total no. of bobbins: 8
spool flange Ø max: 650 mm
rope-Ø min.: 9 mm
rope-Ø max.: 19 mm
type of drive: AC motor
Details
 
 

NIEHAUS SVM 36+1/250 tubular strander 
10810

total no. of bobbins: 36
spool flange Ø max: 250 mm
single wire Ø max: 2,00 mm
single wire Ø min: 0,3 mm
strand / conductor Ø max: 10 mm
Details
 
 

VITARI NR 2 S.0 wire straightening and cutting machine 
10794

wire Ø max: 6 mm
speed max: 78 m/min
outlet table length: 4000 mm
wire Ø min: 2 mm
up to now used for: low carbon and high carbon steel wire
Details
 
 

NIEHOFF MMH121.E2.1.A.14.2618 wet-type multiwire drawing machine 
10635

no. of wires: 14
total no. of dies: 18
inlet wire Ø max: 14 x 2,59 (14 x 10 AWG) mm
finished wire Ø min: 14 x 0,32 (14 x 28 AWG) mm
finish-diameter - max.: 14 x 0,812 (20 AWG) mm
Details
 
 

NIEHOFF NPS - SV 630 D.O.G.E.A. automatic spooler 
10554

spool flange Ø max: 630 mm
winding heads: 1
spool type: NPS 400 / NP 600
up to now used for: insulated cores
wire Ø min Cu: 0,50 mm
Details
 
 

WAFIOS HFD 33 x 3/4" hexagonal mesh weaving machine 
10786

wire Ø max: 1,0 mm
pitch max: 19 mm
weaving width max: 3300 mm
wire Ø min: 0,7 mm
operation voltage: 380 V
Details
 
 

KROLLMANN pointing and threading-up machine 
10723

material Ø min: 8 mm
material Ø max: 20 mm
no. of calibres: 9 / 11
motor power: 7,5 kW
revolutions: 1430 min¯¹
Details
 
 

SAMP BM 800 D double twist bunching machine 
10664

cross section of core max: 16 mm²
twists per minute: 5000
take-up spool flange Ø: 800 mm
cross section of core min: 0,50 mm²
up to now used for: Cu, bare
Details
 
 

ROSENDAHL core insulation line 
10561

cable Ø max: 5 mm
up to now used for: PE, ETFE, PEEK, Vestodur
operation voltage: 380 V
frequency: 50 Hz
control voltage: 220 V
Details
 
 

HERBORN G-1.II/8 straight-line drawing machine 
10530

total no. of dies: 8
inlet wire Ø max: 8 mm
finished wire Ø min: 1,7 mm
finished wire Ø max: 4,2 mm
inlet wire Ø min: 5,5 mm
Details
 
 

KOCH KHZ 8000 + KHZ 2500 + KHS 1250 H cold rolling line 
10475

inlet wire Ø max: 19 mm
finished wire Ø min: 5 mm
finished wire Ø max: 16 mm
up to now used for: ribbed constructional steel wire
type of drive: AC motors
Details
 
 

POURTIER CD 24-630 planetary strander 
10437

spools per cage: 24
spool flange Ø max: 630 mm
cable Ø max: 54 mm
up to now used for: high carbon wire
condition: as new - overhauled
Details
 
 

TECNO IMPIANTI GN 65 cold rolling line 
10415

inlet wire Ø max: 14 mm
finished wire Ø min: 4 mm
finished wire Ø max: 12 mm
up to now used for: ribbed constructional steel wire
operation voltage: 380 V
Details
 
 

MALMEDIE EDM 3 shaving line 
10311

inlet wire Ø max: 10 mm
capstan Ø 1. die: 600 mm
finished wire Ø max: 8 mm
finished wire Ø min: 6 mm
up to now used for: Cu wire
Details
 
 

MARSHALL RICHARDS BARCRO rolling line 
10306

no. of stands: 6
belt width max: 22 mm
strip thickness max: 6,0 mm
wire Ø min: 2 mm
wire Ø max: 15 mm
Details
 
 

HERBORN T 30 intermediate wire drawing machine 
9605

total no. of dies: 17
inlet wire Ø max: 2,76 mm
finished wire Ø min: 0,25 mm
up to now used for: Cu
type of drive: AC motor
Details
 
 

EBNER HOg 330/290 St-h2-d bell-type annealing plant 
10826

useful Ø annealing pots: 3100 mm
mode of heating natural gas: yes
inert gas annealer: hydrogen
useful height annealing pots: 2900 mm
annealing temperature: 500-800 ° C
Details
 
 

OTT Logos 7 D 760 / S 750 straight-line drawing machine 
9210

total no. of dies: 8
inlet wire Ø max: 12 mm
finished wire Ø min: 3,6 mm
block Ø: 760 mm
up to now used for: steel wire, 0,85 % C
Details
 
 

BEKAERT RTA hexagonal mesh weaving machine 
10785

wire Ø max: 1,0 mm
pitch max: 25 mm
weaving width max: 3000 mm
wire Ø min: 0,7 mm
operation voltage: 380 V
Details
 

Contact

Bongard Machines GmbH & Co. KG
Ohlweg 7
58730 Fröndenberg
Germany

Telefon: +49 (2378) 915-5
Fax: +49 (2378) 915-300
info@bongard.de