Bongard Machines GmbH & Co. KG


Ohlweg, 7
Fröndenberg -
Germany (58730)
Tel: +49 2378 9155
Fax: +49 2378 915300
Contact person:

News in detail

Second hand upcast lines and annealing plants - Bongard's latest entries


Published: - 16/12/2018 Author: Simonati, Programming office
Second hand upcast lines and annealing plants - Bongard's latest entries

Upcast lines, hexagonal mesh weaving machines and planetary stranders: browse Bongard's latest acquisitions as regards second-hand wire and cable processing machinery and equipment.

The Germany-based BONGARD MACHINES GMBH & CO. KG has been specialising in purchasing and selling used equipment, from single machines to complete manufacturing plants, since 1959.

 

CABALLE 1+12+20 planetary strander 
10827

spools per cage: 12 + 20
spool flange Ø max: 630 mm
cable Ø max: 40 mm
suitable for: fiber optic ropes and cables: OPGW underwater and sensor cable
up to now used for: Galvan steel, Stalum, Aldrey
Details
 
 

BEKAERT CAZ straight-line drawing machine 
10849

total no. of dies: 10
inlet wire Ø max: 6,5 mm
inlet wire Ø min: 5,5 mm
speed max: 20 m/s
block Ø: 5 x 620 / 5 x 450 mm
Details
 
 

BEKAERT CDZ straight-line drawing machine 
10850

total no. of dies: 10
inlet wire Ø max: 2,4 mm
finished wire Ø min: 0,8 mm
speed max: 25 m/s
block Ø: 300 mm
Details
 
 

NIEHOFF M 450 rod breakdown drawing machine 
10831

total no. of dies: 15
inlet wire Ø max Cu: 8,0 mm
inlet wire Ø max Al: 12,5 mm
inlet wire-Ø max. AL Aldrey: 9,52 mm
inlet tensile strength: 250 Cu (soft) 400 Cu (hard) AL 80 Aldrey 180 N/mm²
Details
 
 

RAUTOMEAD RS 3000-6-8 upcast line 
10862

number of strands: 6
wire Ø max: 8- 12,7 mm
annual capacity: 6000 t
up to now used for: CU - OF ROD
operation voltage: 400 V
Details
 
 

WAFIOS HFD 33 x 3/4" hexagonal mesh weaving machine 
10786

wire Ø max: 1,0 mm
pitch max: 19 mm
weaving width max: 3300 mm
wire Ø min: 0,7 mm
operation voltage: 380 V
Details
 
 

WAFIOS HDS 4 x 1/1/4" hexagonal mesh weaving machine 
10789

wire Ø max: 1,0 mm
pitch max: 31 mm
weaving width max: 4000 mm
wire Ø min: 0,7 mm
operation voltage: 380 V
Details
 
 

WAFIOS HDS 33 x 1" hexagonal mesh weaving machine 
10784

wire Ø max: 1,0 mm
pitch max: 25 mm
weaving width max: 3300 mm
wire Ø min: 0,7 mm
operation voltage: 380 V
Details
 
 

BAREIS S 850 rewinding line 
10852

winding heads: 1
wire Ø max: 5,2 mm
wire Ø min: 2,0 mm
suitable for: rewinding of wire from big spools or Coils to small spools
pay-off bobbins flange Ø: max. 1.000 mm
Details
 
 

DALIAN TJ300 conform extrusion press 
10864

Ø of casting wheel: 300 mm
up to now used for: Al / Cu (oxygen free)
inlet wire Ø max: 12,7 mm
finished wire Ø: 30 mm
material width max: 50 mm
Details
 
 

WAFIOS R 23 wire straightening and cutting machine 
10863

wire Ø max: 4 mm
speed max: 120 m/min
outlet table length: 1900 mm
wire Ø min: 1,0 mm
total connected load: 6 kW
Details
 
 

NIEHOFF MMH121.E2.1.A.14.2618 wet-type multiwire drawing machine 
10635

no. of wires: 14
total no. of dies: 18
inlet wire Ø max: 14 x 2,59 (14 x 10 AWG) mm
finished wire Ø min: 14 x 0,32 (14 x 28 AWG) mm
finish-diameter - max.: 14 x 0,812 (20 AWG) mm
Details
 
 

STOLBERGER SVL 12/450 tubular strander 
10847

total no. of bobbins: 12
spool flange Ø max: 450 mm
single wire Ø max: 3 mm
single wire Ø min: 0,3 mm
strand / conductor Ø max: 6 mm
Details
 
 

NIEHOFF NPS - SV 630 D.O.G.E.A. automatic spooler 
10554

spool flange Ø max: 630 mm
winding heads: 1
spool type: NPS 400 / NP 600
up to now used for: insulated cores
wire Ø min Cu: 0,50 mm
Details
 
 

SAMP BM 800 D double twist bunching machine 
10664

cross section of core max: 16 mm²
twists per minute: 5000
take-up spool flange Ø: 800 mm
cross section of core min: 0,50 mm²
up to now used for: Cu, bare
Details
 
 

KOCH KHZ 4500 straight-line drawing machine 
10837

total no. of dies: 2
inlet wire Ø max: 17 mm
finished wire Ø min: 5 mm
finished wire Ø max: 14 mm
inlet wire Ø min: 8 mm
Details
 
 

steel spool 
10858

spool flange Ø: 630 mm
total spool width: 475 mm
spool useful width: 400 mm
spool bore Ø: 127 mm
no.: 176
Details
 
 

BREITENBACH GESK-4.5 single block 
10859

inlet wire Ø max: 14 mm
capstan Ø 1. die: 600 mm
drawing force: 4500 kg
speed max: 4,5 m/s
up to now used for: stell wire C 15, C 45
Details
 
 

STEULER St 3a tinning line 
10835

no. of wires: 1
wire Ø min: 1 mm
wire Ø max: 18
suitable for: for plating of copper wire with Nickel
up to now used for: Cu wire, annealed
Details
 
 

HERBORN G-1.II/8 straight-line drawing machine 
10530

total no. of dies: 8
inlet wire Ø max: 8 mm
finished wire Ø min: 1,7 mm
finished wire Ø max: 4,2 mm
inlet wire Ø min: 5,5 mm
Details
 
 

WAFIOS R 23 wire straightening and cutting machine 
10863

wire Ø max: 4 mm
speed max: 120 m/min
outlet table length: 1900 mm
wire Ø min: 1,0 mm
total connected load: 6 kW
Details
 
 

NIEHAUS SR 8+1 /650 tubular strander 
10843

total no. of bobbins: 8+1
spool flange Ø max: 650 mm
single wire Ø max: 6 mm
single wire Ø min: 2 mm
up to now used for: hochgekohlter Stahldraht
Details
 
 

EBNER HOg 330/290 St-h2-d bell-type annealing plant 
10826

useful Ø annealing pots: 3100 mm
mode of heating natural gas: yes
inert gas annealer: hydrogen
useful height annealing pots: 2900 mm
annealing temperature: 500-800 ° C
Details
 

Contact

Bongard Machines GmbH & Co. KG
Ohlweg 7
58730 Fröndenberg
Germany

Telefon: +49 (2378) 915-5
Fax: +49 (2378) 915-300
info@bongard.de