Bongard Machines GmbH & Co. KG


Ohlweg, 7
Fröndenberg -
Germany (58730)
Tel: +49 2378 9155
Fax: +49 2378 915300
Contact person:

News in detail

Second-hand wire drawing machines and more: Bongard's latest acquisitions


Published: - 27/11/2019 Author: Simonati, Programming office
Second-hand wire drawing machines and more: Bongard's latest acquisitions

Browse Bongard's latest acquisitions as regards second-hand wire and cable processing machinery and equipment. Wire drawing lines, stranders, bunching machines and much more. 

The Germany-based BONGARD MACHINES GMBH & CO. KG has been specialising in purchasing and selling used equipment, from single machines to complete manufacturing plants, since 1959.

 

SAMP TR/4-SV intermediate wire drawing machine
11393

up to now used for: Cu
no. of drafts: max/min 32/12
inlet wire Ø max: 1.65 mm
finished wire Ø max: 0.3 mm
finished wire Ø min: 0.1 mm

consisting of:

SAMP S.G.S.4 continuous annealer
SAMP spooler

Details
 
 



SAMP TR/4-SV intermediate wire drawing machine

11384

up to now used for: Cu
no. of drafts: max/min 32/12
inlet wire Ø max: 1.65 mm
finished wire Ø max: 0.3 mm
finished wire Ø min: 0.1 mm

consisting of:

SAMP S.G.S.4 continuous annealer
SAMP TE/25-A automatic spooler

Details
 
 



WAFIOS BMS 31 CNC double head bending machine

11403

inlet speed max: 150 m/min
wire Ø min: 2 mm
wire Ø max: 6.5 mm
chamfering unit: chamfer both sides, wire-Ø 3,0 - 6,5 mm

consisting of:

WAFIOS AHP 1-5 Haspel

Details
 
 



WAFIOS R 33 wire straightening and cutting machine

11405

wire Ø min: 1.5 mm
wire Ø max: 7 mm
speed max: 160 m/min
outlet table length: 1000 mm

Details
 
 



KLEMM + FISCHER KFH 24 R intermediate wire drawing machine

11337

up to now used for: steel wire
no. of drafts: 22 (with predrawing block 24 drafts)
inlet wire Ø max: 2.2 mm
finished wire Ø max: 0.5 mm
finished wire Ø min: 0.15 mm

consisting of:

KLEMM + FISCHER double drawing block
KLEMM + FISCHER KFS 200 single spooler

Details
 
 



FRISCH 300 Loose Tube SZ stranding line for FOC

11340

up to now used for: fiber optic cable
suitable for: stranding of 5 to 12 fiber optic loose tube with Ø 1,1 - 4,0 mm
lay length min: 60 mm
lay length max: 500 mm

consisting of:

DELACHAUX spool pay-off
FRISCH Central pay off
SWISSCAB DFO355R pay-off
MAILLEFER Chenille UA2 haul-off caterpillar
FRISCH take-up

Details
 
 



SKET 1+36x560 cage strander with backtwist

10975

up to now used for: steel wire
total no. of bobbins: 36
spool flange Ø max: 560 mm
cage revolutions: 60 min⁻¹
final rope Ø max: 25 mm

consisting of:

SKET haul-off capstan
SKET take-up

Details
 
 



NIEHOFF MMH 101.E2.1.A.16.F21 multiwire drawing machine

11327

no. of wires: 16
no. of drafts: 2 x 21
inlet wire Ø max: 1.8 mm
finished wire Ø min: 0.19 mm

consisting of:

NIEHOFF RM 201.1.R.16.3000 continuous annealer
NIEHOFF VP 100.6 dancer
NIEHOFF SNH 801.1.G.E single spooler

Details
 
 



NIEHOFF MMh 101.E1.1.A.07.F 25 multiwire drawing machine

11196

up to now used for: Cu, bare and tinned
no. of wires: 7
inlet wire Ø max: 1.8 mm
finished wire Ø max: 0.454 mm
finished wire Ø min: 0.15 mm

consisting of:

NIEHOFF VG 30 M continuous annealer
NIEHOFF S 630.2.F.3.E spooler

Details
 
 



NIEHOFF MMH121.E2.1.A.14.2618 multiwire drawing machine

10635

no. of wires: 14
inlet wire Ø max: 2.59 mm
examples of production: inlet wire Ø max. 14 x 2.59 mm (14 x 10 AWG)
finished wire Ø min. 14 x 0.32 mm (14 x 28 AWG)
finished wire Ø max. 14 x 0.812 mm (20 AWG)
finished wire Ø max. 7 x 1.219 mm (16 1/2 AWG)

consisting of:

NIEHOFF RM301.1.R.14.7000 continuous annealer
NIEHOFF WVS 801.2.E.A bundle packer
NIEHOFF WSV 801.2.E.A bundle packer

Details
 
 



NIEHOFF M 450 rod breakdown drawing machine

10831

no. of drafts: 15
inlet wire Ø max: 8 mm
finished wire Ø min: 1 mm
speed max: 40 m/s

consisting of:

NIEHOFF R 500.1.R.2 continuous annealer

Details
 
 



BONGARD CU-C 480 static coiler

10127

up to now used for: Cu wire
material Ø max: 1 mm
Ø of coiling capstan: 480 mm
barrel outside Ø: 585 mm

Details
 
 



KOCH / HERBORN KGT800/1 + 600/12 straight-line wire drawing machine

11009

no. of drafts: 14
inlet wire Ø max: 6 mm
finished wire Ø min: 1.25 mm
drawing capstan Ø: Block 1: 600 mm / Block 2: 450 mm / Block 3-14: 340 mm
speed max: 20 m/s

consisting of:

dancer
HERBORN-BREITENBACH SP-V-30/15-8 single spooler
STENGER coiler

Details
 
 



KOCH KGT 2500/1 - 1600/2 straight-line wire drawing machine

10908

up to now used for: low carbon wire
no. of drafts: 3
inlet wire Ø max: 10 mm
finished wire Ø min: 4 mm
drawing capstan Ø: 1x700 2x600 mm

consisting of:

KOCH KHS 1000 single spooler

Details
 
 



KOCH KHZ 4500 straight-line wire drawing machine

10837

up to now used for: Steel wire with 350 N/mm² strength
no. of drafts: 3
inlet wire Ø max: 17 mm
finished wire Ø min: 7 mm
drawing capstan Ø: 1 x 900/740 / 1 x 900 mm

consisting of:

horizontal pay-off
KOCH KHZ 4500 double drawing block
KOCH KRE-1 wire pulling device
KOCH KHZ 4500 single drawing block
KOCH KRE-1 wire pulling device
KOCH KHS 1250-S traversing single spooler
spool tilting device

Details
 
 



FRIGERIO RT 635/9 straight-line wire drawing line

11319

up to now used for: low carbon wire
inlet wire Ø max: 7 mm
finished wire Ø min: 1.4 mm
number of blocks: 9
speed max: 20 m/s

consisting of:

FRIGERIO SVR 200 pay-off with 2 hydraulic pay-off beams
FRIGERIO mechanical descaler
GSG BSG/T dry powder coating
FRIGERIO BU 125 horizontal spooler

Details
 
 



BEKAERT CAZ straight-line wire drawing machine

10849

up to now used for: low carbon wire
no. of drafts: 10
inlet wire Ø max: 6.5 mm
drawing capstan Ø: 5 x 620 / 5 x 450 mm
speed max: 20 m/s

consisting of:

pay-off
descaler
BEKAERT dancer
BEKAERT single spooler

Details
 
 



NIEHOFF BMV 16.10.1.A rotating braiding machine

11357

suitable for: CU, AL, FE (soft)
no. of pay-off bobbins: 16

Details
 
 



LESMO DTO 630 double twist bunching machine

10607

up to now used for: Cu wire and strands
twists per minute: 6,000
take-up spool flange Ø: 630 mm
cross section of core max: 10 mm²
lay length max: 135.8 mm

Details
 
 



SAMP BM 800 D double twist bunching machine

10663

up to now used for: flexible conductor
twists per minute: 5,000
take-up spool flange Ø: 630 / 800 mm
single wire Ø max: 0.6 mm
cross section of core max: 16 mm²

Details
 
 



IDEAL GA 316 mesh welding line

11157

line wire Ø pre-cut min: 1.5 mm
line wire Ø pre-cut max: 8 mm
mesh width max: 1600 mm
no. of welding transformers: 6

additional data:
Line consist of:
automatic line wire feeding system (LDB).
pushing device.
welding machine.
pull out transport.
pull out transport with stamp.
1 x cross wire feeder for bottom wire with magazin (suitable for manufacturing of special double bar fence).
2 x cross wire magazin (suitable for different wire-Ø or cross wire length.
electric cabinet
automatic mesh stapeling device.

line wire feeding: automatic.
mesh weigth max.: 100 kg.
electrode force: 2.500 N.
air preasure: 26 bar.
cooling water consumption: approx. 35 l/min.

Details
 
 



IDEAL GA 400/1600 mesh welding line

11136

suitable for: manufacturing of industrial mesh.
up to now in production for welding of cable trays with inline line wire cutting and automatic bending and stapeling with roboter.
line wire Ø pre-cut min: 3 mm
line wire Ø pre-cut max: 8 mm
cross wire Ø pre-cut min: 2 mm

consisting of:

KUKA KR 125L100/2 robot
WEINBRENNER GP 125 mesh bending unit

Details
 
 



KOCH KHZ 8000 + KHZ 2500 + KHS 1250 H cold rolling line

10475

up to now used for: ribbed constructional steel wire
inlet wire Ø max: 19 mm
finished wire Ø min: 5 mm
capstan Ø 1: 800 mm
capstan Ø 2: 800 mm

consisting of:

horizontal pay-off
GSG straightener
GSG WEZ/4 mechanical descaler
GSG BSG/T wire coating device
GSG KWG-3 ribbing cassette
KOCH KHZ 8000 single drawing block
KOCH KHZ 2500 single drawing block
KOCH KHS 1250 A single spooler
EVG spool tilting device
STRECKER 3 A butt welding machine

Details
 
 



TECNO IMPIANTI cold rolling line

11186

inlet wire Ø max: 14 mm
finished wire Ø max: 12 mm
finished wire Ø min: 4 mm
speed max: 12 m/s

consisting of:

TECNO IMPIANTI pay-off with pay-off beams
TECNO IMPIANTI mechanical descaler
TECNO IMPIANTI wire coating device
TECNO IMPIANTI single drawing block
TECNO IMPIANTI single drawing block
TECNO IMPIANTI single spooler

Details
 
 



NIEHAUS SVM 36+1/250 tubular strander

10810

up to now used for: steel wire
total no. of bobbins: 36
spool flange Ø max: 250 mm
single wire Ø max: 2 mm
lay length max: 60 mm

consisting of:

pay-off
double haul-off capstan
take-up

Details
 
 



STOLBERGER SVL 12/450 tubular strander

10847

up to now used for: steel wire, high carbon steel
spool flange Ø max: 450 mm
single wire Ø max: 3 mm
strand / conductor Ø max: 6 mm

consisting of:

rotating pay-off
double haul-off capstan
STOLBERGER WAV 24L take-up

Details
 
 



SKET SRN 8 x 630 tubular strander

10629

up to now used for: steel wire
total no. of bobbins: 8
spool flange Ø max: 630 mm
lay length max: 139.6 mm

Details
 
 



ROSENDAHL foam skin extrusion line

10051

screw length: 30 D
speed max: 400 m/min
core Ø: 0,8 - 8,0 mm

consisting of:

ROSENDAHL AWP 630 pay-off
ROSENDAHL DAS 500 double haul-off capstan
MCS 12 wire pre-heater
ROSENDAHL extruder
cooling trough
cooling trough
ROSENDAHL PTS 630 2.2P dancer
ROSENDAHL TW 1251 ER take-up
ROSENDAHL RE 13030 extruder
MOTAN Dosier- und Mischgerät
maximator

Details
 
 



KUKAMA DWPA 630 double spooler

10008

up to now used for: insulated conductors, cores, wire
wire Ø max: 1.1 mm
cable Ø: max 2,5 mm
spool flange Ø max: 630 mm
cross section of core: 0,14 - 1,0 mm²

consisting of:

KUKAMA DST 250 haul-off capstan

Details
 
 



example for reconditioned steel wire drawing line

11346


Details
 

Contact

Bongard Machines GmbH & Co. KG
Ohlweg 7
58730 Fröndenberg
Germany

Telefon: +49 (2378) 915-5
Fax: +49 (2378) 915-300
info@bongard.de