EASYDUR Srl


Via Maja , 5
Arcisate - VA
Italy (21051)
Tel: +39 0332.203626
Fax: +39 0332.206710
Contact person:
Maria Affri
Product and/or service specifications

DOMO - Manual springs tester


Product categories: Controls and checks 

DOMO - Manual springs tester

The structure is C-shaped, with a working opening of 197 mm and with
the possibility of installing a spring guiding rod. The instrument is equipped
with an incremental optical scale (on request an absolute linear encoder
can be fitted) and an electronic load cell for measuring the loads acting on
the spring.
The sagging of the load cell is self-compensated and, on request, up to 2
cells can be installed.

NEW TECHNOLOGY!
100.000 DIVISIONS !

 

The new electronics allow a maximum resolution of up to 100,000 divisions.
The position and force are shown in real time on the broad and luminous
touch-screen display. The measuring units can be changed easily and the measurement
tolerances are easily set.
Other characteristics of the instrument are:


“New electronics”

- 7” touchscreen display
- Possibility of installing an absolute linear encoder
- Self-zeroing load cell
- Selectable units of measurement: kg, g, N, lb (load) mm, inch (position)
- Data exported by USB connection, easily importable in Excel.

 

 

 

 

TECHNICAL DATA

CAPACITY

1O - 500 N

WORKING HEIGHT

197 mm

MINIMUM DIVISION

10 μm (incremental linear encoder) - 0,1 μm (absolute linear encoder)

MAX RESOLUTION

up to 100.000 divisions

POWER SUPPLY

230/115 V