OSCAM


Via Canelli , 104
Torino - TO
Italy (10127)
Tel: +39 011 6635656
Fax: +39 011 6633140
Contact person:

Product and/or service specifications

Machines suitable to create hoops and spirals


Product categories: Other wire forming machines 

Machines suitable to create hoops and spirals

Hoop/spiral machines
Available in a vast range to cover any type of need: single hoops, arches, spirals, etc.

Models:

85
To create hoops and spirals with rods from 6 mm to 25 mm in diameter, with one speed.
Minimum diameter of hoops and spirals: approx. 300 mm.
Feeding speed: m. 25 per minute.

86 2R
To create hoops and spirals with rods from 6 mm to 32 mm in diameter, with double speed.
Minimum diameter of hoops and spirals: approx. 300 mm.
Feeding speed: 30m/minute – 20m/minute.

89 with hydraulic release
To create hoops and spirals with rods from 6 mm to 40 mm in diameter, with hydraulic release device to execute partial hooping.
Allows to execute jobs that cannot be performed with normal spiral machines.
Minimum diameter of hoops and spirals: approx. 400 mm.

89S
To create hoops and spirals with rods from 6 mm to 40 mm in diameter.
Equipped with a motorised counter roller that can be adjusted and controlled from the separate console unit.
It is possible to program length and bending radius. The machine allows to produce shapes with more than one bending radius on the same bar, alternating straight and bent sections, if necessary.
The ideal machine for those who need to produce tunnel supports or complex curved shapes, in general.