SAS ENGINEERING AND PLANNING


Via Alessandro Volta, 5
Suello - LC
Italy (23867)
Tel: +39 031 655593
Fax: +39 031 657223
Contact person:
Carmelo
Product and/or service specifications

Bar to bar peeling line


Product categories: Brushing, descaling and peeling machines 

Bar to bar peeling line

The bar-to-bar Combined Lines are composed as follows:

1 - Pre-straightener, made of two groups: one with a vertical axis with reversed rolls and the other one with horizontal axis.

2 - Pulling unit, composed by a sturdy structure with a dc motor. Made of prismatic guides, feed control and return carriages thanks to a wire hooked by a clamp with an hydraulic control.

3 - Straightening machine, realized with a passage between setted rolls, positioned with a decreasing interaxis and by 90° between the first and the second straightening roll. It allows a processing in sequence of the two parallel sides alternating of squares and flats.

4 - Flying shear, with an hydraulic imput and bushing-to-bushing cut, which allows to lower the specific pressure arisen by the cutting stress on the material and improves the quality of the point in order to obtain a surface cut hortogonally with the axis of the bar.

5 - Two-roll burnisher, designed to straighten round bars of ferrous and non ferrous materials. Precious support both for inline processes with drawers and outline.

6 - Chamfering machine, composed by two unities positioned one in front of the other, where the beveling units are assembled on the edge of the bars. In the middle there are conveyors to transfer the bars in the working position.

7 - Strapping, composed by a metal structure where the strapping machine is integrated. It enables the automatic execution of a series of bindings starting from settings on the proper instrument. The weighing section, composed by a series of cells, allows the execution of the weighing of bundles of bars before the unloading of the bundle of bars. The storage for collecting bundles is composed by a series of motorized chains which allow the collection of bundles of strapped bars and transfer them in the position of unloading of the line.