Tool and die makers consumables

Universal Punch Corporation, leader in the tooling and gauging industry, produces and sells tool and die makers aids.

Universal finished carbide reamers #10010
Finished ground "ready to cut" for general applications

Universal's finished carbide reamers, "ready to cut" made with forty-five dgree included angle, unless other specified angle.

Universal unfinished carbide reamers #10100
Unfinished blank reamers for general applications

Universal's unifinished carbide reamers, are stocked in two length sizes. For extended lengths specified on the end of the part number.

Universal stick laps #10200
Lapping carbide and steel die inserts - low carbon steel S.A.E. 1020

Universal's stick laps are precision ground to close tolerances for use in carbide or steel dies where diamond lapping compounds are used. Straighter and rounder holes can be had hrough the use of stick laps. Special hole configurations (such as angles) are more easily and precisely produced through the use of stick laps.

Roundness and taper within .0002" / 0.005 mm.

Universal die lapping head tool #10300
Lapping carbide and steel dies fits a #2 morse taper tail stock

Universal lapping heads are carried in stock for immediate deilvery and are secifically designed for lapping and reaming carbide or steel dies. Quality made from steel and heat treated. All component parts have been precision ground and fitted to provide years of service.

Universal HY-Press lube #10400
For die assembly and hobbing applications with extreme pressure agent

Universal's unique lubricant is especially formulated for the assembly of the steel or carbides inserts into the die castngs. Also for hobbing applications where extreme pressure is required. Its develops a very high film strenght that resists breaking down under extreme pressure. Dies will assemble and disassemble with ease. Metal will flow without tearing during extrusion / hobbing processes. This product has proven itself with years of success.

Universal diamond compunds #10500
For die lapping and polishing ANSI / ASME standards CWS261-63

Universal’s Diamond Compounds are the result of many years of research and testing to develop a superior diamond abrasive lapping paste. Pure diamond is the only abrasive in our compound (no fillers or undersized particles to fool you). The diamond powders used are critically graded to exceed the specification of the U.S. standards CWS261-63. The base has
high lubricity, acts as a detergent in polishing and does not dry out or ball under lapping  pressures. If you want an efficient, tested, and functioning base, by all means try our compound.


More informations here >>