Business services for the metal working industries: the best companies providing services to the companies of the steel industry, the wire manufacturing and processing field, the tube, sheetmetal and fasteners field. Certifications, consulting and agents.

Online exhibitors

Refine your search

Inoxalca Srl Novate Milanese (Città Metropolitana di Milano)

Born in the 70s, Inoxalca Srl specializes in the hardware sector and commercial hardware. Over the years the company has consolidated and established itself on the market thanks to the experience gained in the production of machined and stamped metal parts.


Inoxalca Srl
Team Human SrlMolteno (Lecco)

Company mainly operating on the Italian market, in the scrap metal industry.  


Team Human Srl
ICE Wire Line Equipment, Inc.Montréal (Communauté-Urbaine-de-Montréal)

The I.C.E. Group, a Canadian industrial and combustion equipment was established in 1958. For almost fifty years, it provided excellence in design, engineering, manufacturing, and service to the heat treatment and wire production industries.


ICE Wire Line Equipment, Inc.
Invimec SrlSovizzo (Vicenza)

New line rolling machines with the train system were developed (with a single motor or independently motorised heads), a range of models for profiling machines was created (also with more than one profiling head), along with a whole series of machinery for subsequent processes (incision, cutting, engraving, winding).


Invimec Srl
Dallan SpaCastelfranco Veneto (Treviso)

Roll forming machines and Systems: Dallan Technology for Excellence.For over thirty five years Dallan has been designing, manufacturing and installing precision rollformers and systems for the processing of sheet metal products, starting from sheet metal coils. Dallan’s experience and machine quality are known worldwide, across five continents and 75 countries. Dallan Company is a benchmark for the production...


Dallan Spa
Fasb Linea 2 srlCremella (Provincia di Lecco)

FASB Linea 2 is a metalworking company that specialises in the machining of metal pipes. Founded in 1981 as a small workshop located in the garage of the enterprising owner Luigi Fumagalli’s home, it now covers an area of approximately 5,000 square meters, of which about 3,000 are covered This constant growth has enabled FASB to gain a significant position on the national and international market.


Fasb Linea 2 srl
Assembling SrlSpilamberto (Provincia di Modena)

Assembling is a company based in Modena (Italy) with over ten years experience in working for wire drawing factories. The enterprise designs, manufactures and assembles ovens, dancers, winders, extruders and other machines.


Assembling Srl
hofmann CERAMIC GmbHBreitscheid-Erdbach ()

One of the company's key manufacturing areas is in technical ceramics for the foundry industry. Hofmann Ceramic also supplies the wire and cable industry with high-quality wear-resistant parts made from oxide ceramic. The third section of the company's product portfolio comprises refractory heavy-duty ceramics for all types of oven construction.


hofmann CERAMIC GmbH
WST KORADI  SrlGravedona ed Uniti (Como)

WST Koradi srl designs and manufactures equipment for wire and metal band. Bending machines, wrapping machines, eyelet, springformers, multiformers, grinders and automatic loading systems: the wide range of products allows the company to solve the multiple demands of customers.


WST KORADI Srl
Condoroil GroupCasale Litta (Varese)

Condoroil proposes itself as a manufacturer of chemicals formulated for the treatment of surfaces. Upstream toward the current trends of the market, the company researches and develops products for each of the applications requested, in order to supply to its users a product that can respond fully to the production demands, also by solving all the unavoidable problems emerging at the beginning and at the end of the...


Condoroil Group
TECNOPRESS srlValmadrera (Provincia di Lecco)

TECNOPRESS is the reliable partner for: modifications and customizations of special components made by the internal technical office; analysis and innovations to fulfil CE regulations; refurbishing and full rebuilding of header and threadrolling;


TECNOPRESS srl
ICMI SrlCisano Bergamasco (Bergamo)

I.C.M.I. specialized in the cleaning, phosphating and calcining process of carbon steel and stainless steel wire. This ecological and patented single wire rod system allows to clean mechanically, phosphate and draw in-line wire rod from 6 mm up to 13 mm dia. for high-carbon material and from 6 mm up to 22 mm dia. in low-carbon material. For stainless steel wire ICMI offers even a new machine to clean and polish it...


ICMI Srl
Carpenteria Fratelli Rusconi SncValmadrera (Lecco)

Carpenteria Rusconi is an Italian carpentry company that deals with plants, machinery, industrial and civil heavy carpentry.


Carpenteria Fratelli Rusconi Snc
Gagliardi Luigi & C. sncCastiglione d'Adda (Lodi)

Our company has been on the market since 1980, operating in the field of dies re-grinding and new finished dies in hard metal.The tecnology acquired working on behalf of the main Italian and foreign wireworks, allows us to state that on a quality level, our products can compete with the best standards of the field. The productions cycle, led by the owners Luigi and Adriano Gagliardi themselves takes entirely...


Gagliardi Luigi & C. snc
Esteves GroupCervelló (Barcelona)

Esteves Group is the world's leading manufacturer of high precision wire drawing dies, cabling dies, and extrusion tooling for the wire and cable industry.


Esteves Group
SEI srl - Servizio Elettronica IndustrialeCivate (Lecco)

Born in 1985, S.E.I. Srl introduces itself in the industrial panorama as ideal partner for manufacturers and final users, supplying solutions for the automation of machinery and installations of process at elevated level of quality.


SEI srl - Servizio Elettronica Industriale
MCS II Mollificio SrlNICHELINO (Torino)

MCS II Mollificio nowadays is a producer of springs for every application, from compression springs (conical, biconical, rectangular from round or squared wire), to single and double torsion springs (simple and with special eyelets for particular uses), made from metal wire and strip.


MCS II Mollificio Srl
Cemanco L.C.Pompano Beach (Florida)

Cemanco LC. Headquartered in Pompano Beach, Florida USA develops, manufactures & supplies customers all over the world with solutions and products for the Wire, Cable, Textile & Automotive industries.


Cemanco L.C.
Rotta MassimoLecco (Lecco)

This company mainly operates on the Italian market.


Rotta Massimo
NIEHOFF Maschinenfabrik GmbH & Co. KGSchwabach ()

Maschinenfabrik Niehoff develops and builds machines and lines which cover nearly all processes for the production of non-ferrous wires and the further processing into insulated data cables and special cables. The services range right through to the planning, installation and turnkey implementation of complete cable factories and comprise extended customer service. 


NIEHOFF Maschinenfabrik GmbH & Co. KG
Metallurgica Locatelli S.p.A.Calolziocorte (Lecco)

Production and sale of low carbon steel wire. Metallurgica Locatelli works in the field of low carbon drawn wire. Founded in 1920 by Fortunato Locatelli this small company located in Lecco, is today a capital company with a staff of about 40 persons working on an area of 20.000 mq. Today Metallurgica Locatelli, located in Calolziocorte (LC), is managed by the grandsons of the founder.


Metallurgica Locatelli S.p.A.
PWT LimitedEast Tamaki (Auckland)

PWT is a research and development business specialising in industrial wire process technologies for the galvanized wire industry. The team at PWT Ltd are highly qualified engineers who have researched, designed and developed ground breaking technologies such as electro-magnetic wiping technology.


PWT Limited
Enco Tecnologie srlLomagna (Provincia di Lecco)

Enco Tecnologie’s mission is to give value-added support to fastener manufacturers by offering decades of experience to our customers.Our Company, specializing in the design and manufacture of quality tooling for forming and stamping, is able to offer the highest quality products and complete service in a consultative format, from research, to recommendation of suitable machines, through to production of final item.


Enco Tecnologie srl
PSM Celada Fasteners SrlMilano (Milano)

PSM CELADA Fasteners is the Italian leader in the sale of a wide range of fasteners through own direct technical sales staff and through sole agents, providing innovative fastening and assembly solutions. The company has more than 50 years of experience and has achieved a reputation of absolute excellence. Among the customers, the greatest blue chips companies in the most diversified fields.


PSM Celada Fasteners Srl
RTP PAGANONI SRLCesana Brianza (Lecco)

Located in the industrial zone of the town, it is easy to reach from Milan (about 50 km away), Lecco (20 km), Como (30 km) and from Switzerland. The map alongside and road signs clearly indicating the name of the company will enable you to reach R.T.P. easily and quickly.


RTP PAGANONI SRL
DCF Group SrlValmadrera (Lecco)

DCF Group is a chemical-petrochemical shafts and machines producer.


DCF Group Srl
QP MECHANICS SASCantù (Province of Como)

Mechanical tools and precision hard metal working. QP Mechanics sets up by the passion for the precision mechanics and his knowledge at 360°. The experience joins an enthusiasm doing our work like a true art. The firm intends as developer of high precision mechanics tools on a customer drawing, our strength is the tungsten-carbide (WIDIA) manufacture both in solid form and assembled in steel bodies.


QP MECHANICS SAS
TRAFILERIA SCERELLI srlAnnone Brianza (Lecco)

Born in the 1974 at Annone Brianza as a low carbon tenor steel producer, the firm grew with costancy increasing, during the time, its production capability in order of use of the best technologies in wiredrawn metal. Today TRAFILERIA SCERELLI is able ta grant a request of 30.000 tons a year.


TRAFILERIA SCERELLI srl
ABS Srl - Cutting to size and machining pipesMolteno (Lecco)

For over 30 years, abs s.r.l., founded by a tenacious family of blacksmiths from the brianza region in the 1960s, has been machining carbon steel, stainless steel, brass, aluminium and copper pipes.The company’s headquarters is still in molteno, where the production department that performs most types of machining is also based. a couple of decades ago, the production units in oggiono and costamasnaga were...


ABS Srl - Cutting to size and machining pipes
PMA SrlLecco (Lecco)

For many years, our company deals in study, planning and building of machines and accessories for the wiry manufacturing. We are specialized in reparations, spare parts and construction of accessoires for the lines completion. The multi-years experience and our skilled staff moreover, consent us to offer a service of complete assistance and servicing for every plant. Our company boasts like customers the most...


PMA Srl
M & G Bagnoli di Sopra (Provincia di Padova)

M. & G. boasts many years of experience in the production and processing of dies and in the manufacturing of technical articles for drawing.The high quality of the products is guaranteed by continuous and automated production processes, and from strict quality controls performed both on the raw material and on all stages of processing.


M & G
UDM SrlZona Industriale B (Provincia di Udine)

Although a young company, UDM packs a big punch when it comes to technology, Innovation and experience. UDM was born with the idea of designing, selling and building cold drawing lines, cold rolling mills and extrusion services for non-ferrous and ferrous materials.


UDM Srl
MADERA ACCIAI srlCinisello Balsamo (Milano)

Since 1960 MA.DE.RA. has been dealing with wholesale trade of steel wire and strips. Specifically carbon steel, stainless steel, alloys, iron and all the materials mainly used for springs, trinkets and springy components. Our company in 1998 gained the acknowledgment according to UNI EN 9001:2000. The continuous monitoring process of activities and services are always an incentive for our improvement in compliance...


MADERA ACCIAI srl
Candor Sweden ABNorrköping ()

CANDOR, founded in 1946, specializes in processes and equipment for the surface treatment and metal finishing industry.


Candor Sweden AB
Ronchi-ils LubrificantiCarate Brianza (Monza and Brianza)

Ronchi-ils is an authorized distributor of Castrol Industrial for the Metalworking sector. Since 2012 Ronchi-ils is also an Italian distributor of Castrol OFFSHORE Subsea products of the Transaqua and Brayco Micronic series. Castrol is able to cover all the needs of lubrication for the metal industry: neat cutting and forming oils, emulsifying oils, machine lubricating oils, special greases, quenching oils,...


Ronchi-ils Lubrificanti
Baudrand New TechLyon (Rhône)

For more than 20 years, Baudrand New Tech has specialized in the production of equipment for parts of complex shapes, coiled or punched, made from wire or metal strip.


Baudrand New Tech
SPREAFICO s.r.l.GARLATE (Lecco)

The firm is structured with a rolling and a drawing department, that have a productive capacity within a range from 2 mm. to 38 mm. The strong points are: wide range of production capacities, high-quality standards, care and attention in the service offered to customers. All materials are checked and selected to ensure maximum reliability in processing. The productions have a wide range of applications:...


SPREAFICO s.r.l.
Chemetall Italia S.r.L.Giussano Birone (Milano)

When it comes to chemical surface treatment of metals, Chemetall's reputation as a leading supplier to the industry is unsurpassed. Be it car manufacturers, automotive industry suppliers, steel mills, cold formers or other metal-treating industries, Chemetall provides high performing products and processes for almost any application.


Chemetall Italia S.r.L.
Eurospecial SrlBulciago (Lecco)

Eurospecial S.r.l. was established in 1997 by combining the 20-year experience of Casiraghi Ambrogio, Tentori Eugenio and Vergani Carlo in the field of special tools realization for screws pressing.Expertise, flexibility, sensitivity, innovation and continuous investments in technology and employees training and human resources have made Eurospecial S.r.l. the ideal supplier being able to satisfy its Client’s most...


Eurospecial Srl
SPF Essepieffe SrlMartinsicuro (Teramo)

The company SPF, with great experience on a European level, is specialized in delivering vanguard solutions for industrial coding.The history of this company begins in 1987. In 20 years its founder, Mr. Leo Ferrari, transformed the company from a little distributor, to a producer of tagging systems for identification.


SPF Essepieffe Srl
Uldrian GmbH MaschinenbauWaldbronn (Karlsruhe)

Uldrian GmbH Maschinenbau is a medium-sized company based near Karlsruhe in Baden-Württemberg (Germany), since 3 decades a professional manufacturer of CNC transfer machines and post processing for extrusion parts.Our custom-engineered transfer machines for the production of CNC machined parts in high volume work quickly, safely and economically.


Uldrian GmbH Maschinenbau
FH Machinery Inc.Ivyland, PA ()

FH Machinery - Your single source for productivity solutions. The company serves the fastener and forming industries with top lines of new machinery as well as good used equipment. As a full-service distributor for the fastener industry, FH Machinery can also supply tooling, tool design, product development and rebuilding/remanufacturing.


FH Machinery Inc.
Compri Tube Clean - Alka srlPonteranica (Bergamo)

The Compri tube cleaning system is based upon environmentally friendly molded and flexible polyurethane foam projectiles, which are compacted and propelled by means of compressed air at speed of up to 15 meters per second through Hose Tube and Pipes (HTP). The projectile cleans HTP lines with ease. Right angled bends; T pieces; turns and windings, ball and through valves are all easily negotiated.


Compri Tube Clean - Alka srl
Nuova T srlPozzolo Formigaro (Provincia di Alessandria)

NuovaT manufactures natural diamond, monocrystalline and polycrystalline diesEver since Tifle turned into NuovaT (NuovaT stands for "new TIFLE"), we endeavoured to achieve the highest possible standards through research and innovation. We pride ourselves for the sintering processes...


Nuova T srl
HeroslamAbanto-Zierbena (Bizkaia)

Heroslam (HP), founded in 1942, is an international leader in the design and manufacture of thread rolling tools for manufacturers of screws, nails and fasteners, primarily geared toward the aeronautics and automotive industry.


Heroslam
Kinrei of AmericaWayne (Passaic County)

Kinrei of America's cabling, bunching, and twinning products represent the latest advances in cable production technology. We offer complete selections of machines for ultra thin wire, unilay and concentric, litz, automotive, medical, twinning and cabling in tubular, single or double twist.


Kinrei of America
Inoptim SrlLecco (Lecco)


Inoptim Srl
M.P. METAL PLAST COMPONENTS SrlCalolziocorte (Lecco)

Medium heavy metal structural work construction to drawings. The “MP Metal Plast Components Srl” is a small but solid company able to create large projects. Its message “small but great for the great” expresses the company’s potential. The company is known for its “STAR ONE” hook, manufactured exclusively by MP, it is created based on specific customer needs, both in terms of dimensions and supplied accessory...


M.P. METAL PLAST COMPONENTS Srl
Expometals.net - Example online standValmadrera (Lecco)

Do you want your company to appear in this space? Take an online stand on expometals.net, the international online fair for the metal working industry, from raw materials to finished products. Your company name will rotate in this showcase on the 5 homepages of the Network, and it will appear in your belonging pavilion. expometals is a simple, economic and new generation instrument to increase the...


Expometals.net - Example online stand
Bhansali Bright Bars PVT. Ltd.Grant Road, Mumbai  ()

Bhansali specializes in Stainless Steel Bright Bars, Hexagons and Squares. Besides, Bhansali has a strong foothold in Stainless Steel Wires, Wire Rods, Threaded Rods and Flanges business. These products are manufactured at our state-of-the-art modern plant in Navi Mumbai, India. Bhansali is enjoying "preferred supplier" status from buyers all around the globe for these products.  


Bhansali Bright Bars PVT. Ltd.
Trafilerie di ValgreghentinoValgreghentino (Lecco)

The company produces steel wires for industrial use by using the latest technologies in both dry or wet drawing and in thermal and surface treatments: lead patenting, hot-dip galvanization or semi-finished products phosphatation.


Trafilerie di Valgreghentino
Tecnomovint SrlGorlago - 24060 (Bergamo)

Vendors and manufacturers of lifting and moving systems such as: ropes, stud bolts, chains, dynamometers, magnets, “C” hooks, R/C for special gears... Single rail plants and cranes.


Tecnomovint Srl
Studio MapelliLecco - Monza (Lecco)

This company works only on the Italian market


Studio Mapelli
DIM SrlMilano (Città Metropolitana di Milano)

Founded in 1985, D.I.M. markets a range of more than 2000 standardised codes, guaranteeing that all the articles are high quality products supplied by certified companies.


DIM Srl
Ambrosetti  DanieleTorbole Casaglia (Provincia di Brescia)

The company AMBROSETTI DANIELE, distributor and seller of machinery for the wire industry, was founded in 1965 by Daniele Ambrosetti's father AMBROSETTI EMILIO. AMBROSETTI DANIELE now represents a historic company in the field of wire. Currently the company operates as a representative of the new company SB2C, specialized in the area of WIRE FEEDERS, BENDERS WITH ELECTRONIC AND MECHANICAL GUIDES, and CUSTOM LINES...


Ambrosetti Daniele
HS Automazioni Srl + ASPE SasMathi (Città Metropolitana di Torino)

ASPE offers a wide range of automatic machines focused on tapping of internal threads and secondary machining intended for manufacturers of Fasteners and special parts, obtained by cold forming.


HS Automazioni Srl + ASPE Sas
Punto Inox ServiceMerone (Como)

Punto Inox Service strongly wants to be an answer to the growing demand of the products offered, always aiming at a high quality standard. We feel to be a company that pays careful and due attention to market trends, ready to face the European competition by offering the best, both in terms of reliability and service.


Punto Inox Service
OFFICINA BONACINA SrlCalolziocorte (Lecco)

Officina Bonacina srl is a company founded in 1958 by Alessandro Bonacina with 'activities of Mechanical Workshop for the production and design Machine Tool and mechanical machining. In 1981, after their father death, the successive two daughters Enrica and Lorenza Bonacina, continue l 'activities in mechanical manufacturing improving the production with CNC machines.- Ties rods to customer design- Anchor bolts,...


OFFICINA BONACINA Srl

Testimonials

René Branders, FIB Belgium s.a. - Belgium: “We have been online for two years and are very satisfied with Expometals. The Google ranking from their website is excellent. The platform is simple to manage and efficient!”

Pietro Tocchetti, Cometo S.n.c. - Italy: “We received several requests for quotation through the portal, and more than one brought to a successful conclusion.”

Cristian Saraceno, Tramev S.r.l. - Italy: “For a company pursuing internationalization, Expometals is an effective tool, as it allows to increase the visibility in the whole world.”

Follow us on




Compatible with

Numbers in real time

199,707 annual visitors
9,023 news since 2002
23,335 registered users
6,813 companies
297 online exhibitors
3,158 products

Contact us

Headquarters
via Manzoni 75 - 23868 Valmadrera (LC) Italy
Tel.: +39 0341 580139
Mobile: +39 349 8385199
Skype: expometals
E-mail: staff@expometals.net