Wire drawing, stranding and other used wire and cable machines for sale

The German supplier of used wire and cable machines Bongard Machines GmbH & Co. KG regularly shows a selection of the best machines from its extensive stock on expometals.net.
Wire drawing machines, rolling machines, spools, cable making machines - here you will find a list of machines and equipment for all your wire and cable manufacturing and processing needs, from stand-alone machines to complete lines.  
NIEHOFF MMH 112.E1.1.A.16.F21 multiwire drawing machine
12222 suitable for: EC-Aluminium und AlFeMg
no. of wires: 16
inlet wire Ø max: 2,5 mm
finished wire Ø max: 0,6958 mm
finished wire Ø min: 0,202 mm
consisting of:

NIEHOFF RMA 202.0.S.16.4000 continuous annealer
NIEHOFF S 801.1.F.E spooler
NIEHOFF S 801.1.F.E spooler
RESY filtration unit

Details  

Breitenbach / Sket / Koch overhead-type wire drawing machine
11069 no. of drafts: 7
inlet wire Ø max: 5.5 mm
finished wire Ø min: 2 mm
speed max: 10 m/s
consisting of:

KOCH KEWS 2 goose neck coiler
WIRE LAB COMPANY mechanical descaler
CARLO SALVI brush descaler
tiltable pay-off beams

Details  

KOCH cold rolling line
12176 up to now used for: construction steel
inlet wire Ø max: 18 mm
finished wire Ø max: 16 mm
finished wire Ø min: 5 mm
no. of drafts: 1
consisting of:

KOCH KBR 16 string in device
KOCH KBR16 mechanical descaling / stretching unit
GSG WBE brush descaler
GSG BSG/TF dry powder coating
TD 14 Rolling stand
TD 14 Rolling stand
KOCH KBR 16 / S Roll gantry drawing block
GSG relaxing unit
KOCH KSS 1250 C double spooler

Details  

KOCH cold rolling line
12186 inlet wire Ø max: 16 mm
finished wire Ø max: 14 mm
finished wire Ø min: 5 mm
no. of drafts: 2
speed max: 10 m/s
consisting of:

GSG string in device
GSG WEZ III mechanical descaler
GSG WBE4 brush descaler
GSG BST dry powder coating
GSG KWG 3 Rolling stand
GSG KWG 3 Rolling stand
KOCH KEG6300 drawing block
GSG DEG 9 relaxing unit
KOCH KSS 1250 W double spooler

Details  

BOXY steel spool
12229 no.: 34
spool flange Ø: 630 mm
total spool width: 440 mm
spool bore Ø: konisch 127 mm
Details  

KOCH KGT 25/10 straight-line wire drawing machine
12123 up to now used for: high carbon steel wire with 0,35-0,65% C
suitable for: mattress spring wire
no. of drafts: 10
inlet wire Ø max: 6 mm
finished wire Ø min: 1,4 mm
consisting of:

KOCH KEWS III-Z coiler with drawing die
KOCH KES mechanical descaler
KOCH BSA-1 sand belt grinding machine
KOCH DSB wire cleaning and wet coating unit
KOCH ÜAG/2K overhead-type pay-off

Details  

BEMA tandem single twist stranding line
12061 up to now used for: insulated cores
technical condition: Electrical system should be renewed (water damage).
spool flange Ø max: 1600 mm
core Ø max: 20 mm
consisting of:

BEMA SE 160 single twist buncher
BEMA SE 125 single twist buncher

Details  

SAMP MT8.2x7.27 multiwire drawing machine
12020 no. of wires: 14
inlet wire Ø max: 1,8 mm
finished wire Ø max: 0,3 mm
finished wire Ø min: 0,1 mm
consisting of:

SAMP R16M.14.14.1000 continuous annealer
SAMP TE/63-N single spooler
SAMP TE/63-N single spooler

Details  

BZK AW-2000-0 V.H.M. take-up
12016 up to now used for: Cu, Al
material Ø min: 3,5 mm
material Ø max: 30 mm
reel flange Ø max: 2600 mm
Details  

TROESTER steel rope / Prestressed concrete strand extrusion line
11981 up to now used for: M_HDPE
output capacity: 455-570 kg/h
examples of production: Rope diameter: 15.70 mm
Conductor shape stranded: 7 x 5,20 mm
Diameter after sheathing: max. 21,70 mm
Rope weight: 1.172 kg/m.
Rope weight after sheathing: 1.404 kg/m.
Max. line speed from winder to winder: 50 m/min.
Max. line speed from winder to coiler: 200 m/min.
consisting of:

TROESTER LABR 2225/13 pay-off
NF 0-100/820/1200 Tracking device
TROESTER AG 30_12 haul-off capstan
length measuring unit
SUBEC roll straightening unit
WIMA tandem grease emptying unit
Grease insert unit
LABOTEK Material hoper
SVR 50 transport unit
LT 6 blower
Suction lance
TROESTER PXA 120/25D extruder
screw transport unit
WEINREICH Tempering unit
Qu 40E Cross head
SIKORA Laser 2025 XY diameter controller
SIKORA Spark 2030 BS spark tester
TROESTER cooling trough
cooling unit telescop
dryer
cooling water supply unit 2m³
cooling water pump
cooling water supply unit heat exchanger
9040 C 1.1G Inkjet printer
AG 30/12 haul-off capstan
TROESTER LAFR 2225/25 take-up
TROESTER VE50-900-1000 Traversing unit
TROESTER LAFR 225/25 take-up
VE50-1100-1000 Traversing unit
Dancer unit
traversing unit
GCR Eurodraw BSS-1900 P.C. STRAND LAYER REWINDING LINE
electric cabinet
steel spool

Details  

NIEHOFF SY500.D.3.G.E double spooler
11964 suitable for: for coiling of Cu and Al
wire Ø min: 1.5 mm
wire Ø max: 4.8 mm
spool flange Ø max: 630 mm
spool change : automatic
consisting of:

BOZDEMIR 6BAR/480 K8F dancer

Details  

LUKAS DCI 5-150/410-40/1-25/6 inline wire drawing machine
11966 up to now used for: Cu enamelled wire
no. of drafts: 5
inlet wire Ø max: 4,5 mm
finished wire Ø max: 4,1 mm
finished wire Ø min: 1,8 mm
Details  

KUKAMA / KURRE core insulation line
11947 material: PVC
cable Ø max: 10 mm
no. of extruders: 2
additional data: - Manufacturer controller: EUROTHERM
The extrusion line is supplied with a rotating cross head (rotation speed adjustable by motor). This has the advantage that cables with a twisted colour strip can be produced.
consisting of:

KURRE PW 800 - 00 - 30T pay-off
KUKAMA KU 50-25 extruder
KUKAMA KU 35-25 extruder
SIKORA diameter controller
KUKAMA KW 5 Teleskopkühlrinne
KUKAMA cooling trough
cable dryer
SIKORA spark tester
SIKORA Laser 2025 XY diameter controller
KUKAMA DST 250 haul-off capstan
KUKAMA WP 630 take-up

Details  

KOCH CAM 25 D double horizontal pay-off
11939 wire Ø max: 25 mm
number of pay-off stations: 2
additional data: Mandral length: 2.000 mm
Number of Coils: 2 (1x in working position, 1x in loading(unloading position).
pay off: 180° rotating
Unbending pintch roll-Ø: 180 mm
Pintch roll drive: 2 x DC motors
with straightening unit (hydraulic adjustable)
number of rolls straightener: 2 + 3 (roll-Ø 130 mm)
Details  

VITARI NR 410 wire straightening and cutting machine
11809 wire Ø min: 4 mm
wire Ø max: 10 mm
outlet table length: 6000 mm
Details  

OMSDELISI wire straightening and cutting machine
11810 wire Ø min: 6 mm
wire Ø max: 12 mm
outlet table length: 10000 mm
Details  

WTM taping line
11773 up to now used for: Aluminium foil, PE foil, Mica foil or paper foil
technical condition: good in year 2008 reconditioned and new electrics
cable Ø: up to now used for 0,6 - 3,0 mm
speed: up to now used for 4 - 15 m/min
consisting of:

WTM spool pay-off
WTM take-up

Details  

FRIGERIO S500/4 S400/7 straight-line wire drawing machine
11753 up to now used for: high carbon steel wire
inlet wire Ø max: 3.8 mm
finished wire Ø min: 0.6 mm
examples of production: Inlet wire Ø max. with low carbon wire: 5,5 mm
consisting of:

FRIGERIO BU 63 single spooler

Details  

HI-DRAW MACHINERY straight-line wire drawing machine
11728 up to now used for: low, medium and high carbon steel wire
no. of drafts: 5 + 1 (coiler with drawing die)
inlet wire Ø max: 8.5 mm
finished wire Ø min: 2.5 mm
consisting of:

LÄMNEA BRUK single spooler
HI-DRAW MACHINERY coiler with drawing die
uncoiler
uncoiler

Details  

SICTRA TFC 14T/5-15/CM+RC300/14 multiwire drawing machine
11723 up to now used for: Cu
no. of wires: 14
inlet wire Ø max: 0.45 mm
finished wire Ø min: 0.05 mm
consisting of:

SICTRA 329/211RC continuous annealer
SICTRA BO 63/C single spooler
Drum drainage station

Details  

EVG G55/102-RV/15 mesh welding line
11686 line wire Ø max: 10 mm
cross wire Ø max: 10 mm
strokes (cross wire) min / max: 120
mesh width max: 2750 mm
Details  

LESMO DTO 630 bunching machine
11667 up to now used for: Cu
twists per minute: 6000
take-up spool flange Ø: 630 mm
cross section of core max: 10 mm²
Details  

ERDMANN DR 24-W4-LT ultrasonic cleaning line
11655 up to now used for: low carbon and high carbon steel wire
suitable for: cleaning of max. 24 wires inline with ultrasonic
Details  

ITAL 80/25 extrusion line
11499 up to now used for: PVC, XLPE, HFFR compounds
screw Ø: 80 mm
screw length: 25 D
line speed: 150/200 m/min
consisting of:

ITAL 80.TS.100 extruder
EUROTEK cross head
cooling trough
CLINTON spark tester
movable take up
driven pay-off
AEROEL diameter controller
haul-off capstan
double take-up

Details  

BEKAERT CAZ straight-line wire drawing machine
11493 up to now used for: low carbon wire
no. of drafts: 10
inlet wire Ø max: 6.5 mm
drawing capstan Ø: 5 x 620 / 5 x 450 mm
consisting of:

pay-off
descaler
BONGARD dancer
BEKAERT single spooler
Details  

SCHLATTER PG 24.1/12C mesh welding line
11417 suitable for: welding of Gabions, industrial fence and mesh
line wire Ø min: 3 mm
line wire Ø max: 6 mm
mesh width max: 2500 mm
Details  

SAMP TR/4-SV intermediate wire drawing machine
11378 up to now used for: Cu
no. of wires: max/min 32/12
inlet wire Ø max: 1.65 mm
finished wire Ø max: 0.3 mm
finished wire Ø min: 0.1 mm
consisting of:

SAMP S.G.S.4 continuous annealer
SAMP TE/25-A automatic spooler

Details  

BONGARD KW-650 TK static coiler
11199 suitable for: up to now used for coiling of insulated wires up to cross section of 35mm²
Ø of coiling capstan: 655 mm
barrel outside Ø: 800 mm
speed max: 1000 m/min
Details  

M + E NMG25 + SP380 fine wire drawing machine
11141 up to now used for: patented and brass coated high carbon steel wire with 0,9% C
technical condition: very good, mechanical overhauled (new bearings and sealings)
no. of drafts: 25 (24 drafts installed)
inlet wire Ø max: 1.4 mm
finished wire Ø min: 0.08 mm
consisting of:

M + E SP 380 single spooler

Details  

IDEAL GA 400/1600 mesh welding line
11136 suitable for: manufacturing of industrial mesh.
up to now in production for welding of cable trays with inline line wire cutting and automatic bending and stapeling with roboter.
technical condition: line will not be sold in Europe, function control renwed
line wire Ø min: 3 mm
line wire Ø max: 8 mm
cross wire Ø min: 2 mm
consisting of:

KUKA KR 125L100/2 robot
WEINBRENNER GP 125 mesh bending unit

Details  

BARCRO D 13 rod breakdown drawing machine
11023 up to now used for: Al
no. of drafts: 13
inlet wire Ø max: 9.5 mm
motor power: 150 kW
consisting of:

dancer
BARCRO single spooler

Details  

SKET 24x560 cage strander with backtwist
10975 up to now used for: steel wire
total no. of bobbins: 24
spool flange Ø max: 560 mm
cage revolutions: 60 min⁻¹
final rope Ø max: 25 mm
consisting of:

SKET haul-off capstan
SKET take-up
steel spool

Details  

HERBORN-BREITENBACH M-3.R/4+G-4.0/8 straight-line wire drawing machine
10915 suitable for: drawing of low carbon and steel wire
no. of drafts: 8
inlet wire Ø max: 2.6 mm
finished wire Ø min: 0.8 mm
motor power: 8 x 15 kW
consisting of:

HERBORN-BREITENBACH single spooler
BREITENBACH spool pay-off
KISTNER TM 300 dancer

Details  

GSG RWCB 400-3 brush descaler
10913 up to now used for: high carbon steel wire
suitable for: For brush descaling and removal of light rust
wire Ø min: 5.5 mm
wire Ø max: 16 mm

additional data:
Suitable for any wire quality
3 pair of brushes arranged in an offset of 60°.
Special brushing process achieves outstanding surface quality.
Automatically re-adjustment of brushes until complete wearout.
Long lifetime of brushings due to a high efficency degree.
Wire diameter (low carbon) 5,5 - 16,0 mm
Wire diameter (high carbon) 5,5 - 10,0 mm
Line consist of:
mechanical descaling unit (suitable up to Ø 12 mm wire).
Brush descaling unit.
Details  

STOLBERGER SVL 12/450 tubular strander
10847 up to now used for: steel wire, high carbon steel
spool flange Ø max: 450 mm
single wire Ø max: 3 mm
strand / conductor Ø max: 6 mm
consisting of:

rotating pay-off
double haul-off capstan
STOLBERGER WAV 24L take-up

Details  

STOLBERGER BTE 60/2 taping machine
12171 up to now used for: steel tape
capstan Ø: 600 mm
belt width max: 60 mm
revolutions: 450 min⁻¹
Details   Contact Bongard Machines GmbH & Co. KG
Ohlweg 7
58730 Fröndenberg
Germany phone: +49 (2378) 915-5
[email protected]