EXAIR Corporation


11510 Goldcoast Drive,
Cincinnati - Hamilton County
Ohio (45249)
Tel: +1 513-671-3322
Fax: +1 513-671-3363
Contact person:

News in detail

HazLoc Cabinet Coolers Approved for Class I Div 1


Published: - 09/04/2019 Author: Exair
HazLoc Cabinet Coolers Approved for Class I Div 1

   EXAIR's new Hazardous Location Cabinet Cooler® Systems have been set apart from the competition by achieving the UL classified designation for Div1 environments. They have been tested by UL and passed their stringent requirements for use upon classified purged and pressurized electrical enclosures within Class I Div 1, Groups A, B, C and D; Class II Div 1, Groups E, F and G – and Class III environments. The cooling capacity of up to 5,600 Btu/hr. is ideal for electrical enclosures with problematic overheating. They are CE compliant and available for NEMA 4 and 4X enclosures.

   EXAIR HazLoc Cabinet Coolers circulate 20°F (-7°C) air inside the enclosure to prevent high temperature faults. They mount in a standard electrical knockout while keeping the NEMA 4 or 4X rating of the enclosure. Cabinet Cooler Systems include an auto drain filter separator to ensure no moisture passes to the inside of the electrical enclosure. An optional thermostat control minimizes compressed air use and keeps the enclosure at ± 2ºF of the setting.

   EXAIR’s full line of Cabinet Cooler Systems are available for NEMA 12, 4 and 4X enclosures from 275-5,600 Btu/Hr and are UL listed and CE compliant with no moving parts to wear out. Applications include cooling control panels, PLC’s, microprocessors, fractional Hp variable frequency drives and robotics. www.exair.com/186/hazloc.htm

Products and services
Air Wipes for blowoff, drying, cleaning and cooling of pipe, cable, extruded shapes, hose, wire
Electronic Flow Control system for compressed air
Digital Flowmeter for compressed air usage monitoring and waste detection
Ultrasonic Leak Detector for compressed air systems
Digital sound level meter for noise levels monitoring
Cold guns for cooling machining operations
Standard and high force air nozzles for every application
Air Jets for part ejection or hard-to-reach area
Reversible drum vacs for liquids pumping
Air amplifiers for ventilation or hot parts cooling
Chip trapper for chips, swarf and shavings cleaning
Back blow air nozzles for closed tubes cleaning
High Lift Chip Trapper for deep wells, pits and cisterns liquids recycling
Heavy Duty Vacs for dry materials and dust
Chip Vac for wet or dry chips picking up
Lightweight and powerful standard and deep hole vac-u-guns
Heat-resistant air amplifiers for hot air moving
Ion air knives for static charge removal
Ionizing bar for static elimination
Ion air wipes for for static elimination on pipes, extrusions and cable
Ion air cannon for cleaning and static electricity neutralizing
Ion air gun and jet for dust removal on hard-to-reach parts
Ionizing point for winding, rewinding or slitting operations
Vortex tubes for compressed air cooling
Adjustable spot coolers for compressed air cooling
Mini cooler for high speed operations tools cooling
Air knives for metal parts, webs or conveyors cleaning, drying and cooling
Safety air guns for production line environments
Safety air gun for wide area blowoff, cooling, and drying applications
Vacuum generators for pick and place operations