EXAIR Corporation


11510 Goldcoast Drive,
Cincinnati - Hamilton County
Ohio (45249)
Tel: +1 513-671-3322
Fax: +1 513-671-3363
Contact person:

News in detail

NEMA 4X cabinet coolers fit in tight spaces


Published: - 13/04/2018 Author: Katia Martinini
NEMA 4X cabinet coolers fit in tight spaces

EXAIR’s new Type 316 Side Mount Kits make the mounting of a NEMA 4X Cabinet Cooler possible when an electrical enclosure has limited space on the top or side. These Type 316 Side Mount Kits are corrosion resistant. The compact Cabinet Cooler is a low cost way to purge and cool electrical control panels, protecting sensitive electronics from heat, dirt and moisture.

Cabinet Coolers convert an ordinary supply of compressed air to 20°F without refrigerants or CFC’s. The cold air is circulated through the enclosure to eliminate high temperature malfunction. Cooling capacities up to 5,600 Btu/hr. are available. Cabinet Cooler systems include a compressed air filter to assure no moisture or dust is introduced inside the panel. Optional thermostat control minimizes compressed air use. Cabinet Coolers are UL Listed, conform to the CE general safety directive for machinery and have no moving parts to wear out.

The Side Mount Kits maintain the NEMA 4X rating of large and small electrical enclosures. Models for use on NEMA 4 and 12 enclosures are also available. Applications include cooling PLCs, microprocessors, variable frequency drives, industrial computers, and robotics. Side Mount Kits start at $220.

For more information contact: EXAIR Corporation
11510 Goldcoast Dr.
Cincinnati, OH 45249-1621
Phone: (800) 903-9247
Fax: (513) 671-3363
E-mail: techelp@exair.com
www.exair.com/smsidecc.htm

Products and services
Air Wipes for blowoff, drying, cleaning and cooling of pipe, cable, extruded shapes, hose, wire
Electronic Flow Control system for compressed air
Digital Flowmeter for compressed air usage monitoring and waste detection
Ultrasonic Leak Detector for compressed air systems
Digital sound level meter for noise levels monitoring
Cold guns for cooling machining operations
Standard and high force air nozzles for every application
Air Jets for part ejection or hard-to-reach area
Reversible drum vacs for liquids pumping
Air amplifiers for ventilation or hot parts cooling
Chip trapper for chips, swarf and shavings cleaning
Back blow air nozzles for closed tubes cleaning
High Lift Chip Trapper for deep wells, pits and cisterns liquids recycling
Heavy Duty Vacs for dry materials and dust
Chip Vac for wet or dry chips picking up
Lightweight and powerful standard and deep hole vac-u-guns
Heat-resistant air amplifiers for hot air moving
Ion air knives for static charge removal
Ionizing bar for static elimination
Ion air wipes for for static elimination on pipes, extrusions and cable
Ion air cannon for cleaning and static electricity neutralizing
Ion air gun and jet for dust removal on hard-to-reach parts
Ionizing point for winding, rewinding or slitting operations
Vortex tubes for compressed air cooling
Adjustable spot coolers for compressed air cooling
Mini cooler for high speed operations tools cooling
Air knives for metal parts, webs or conveyors cleaning, drying and cooling
Safety air guns for production line environments
Safety air gun for wide area blowoff, cooling, and drying applications
Vacuum generators for pick and place operations