EXAIR Corporation


11510 Goldcoast Drive,
Cincinnati - Hamilton County
Ohio (45249)
Tel: +1 513-671-3322
Fax: +1 513-671-3363
Contact person:

News in detail

Stainless steel air jets resist corrosion and heat


Published: - 11/06/2018 Author: Scaccabarozzi, Ed. Staff
Stainless steel air jets resist corrosion and heat

EXAIR’s new 303SS Air Jets provide reliable and efficient blowoff and cleaning within corrosive, high temperature, or washdown environments. These 1/8 NPT Stainless Steel Air Jets replace open tubes and pipe nipples on parts cleaning, drying and cooling operations. With temperature rated up to 400°F, they will produce up to 1.25 pounds of force upon your target.

Available in two styles, the High Velocity Air Jet provides maximum force with a confined and directed airstream. The Adjustable Air Jet style allows you to easily control the air upon your target with its micrometer air gap indicator. EXAIR Air Jets utilize the Coanda effect to pull in the surrounding ambient air and increase the total volume of air impacting your target area. Both the outlet and inlet can be ducted for remote positioning.

Air Jets require a small amount of compressed air which can be less than half that of open air lines in your plant. Typical noise level reductions are 8-10 dBA. Stainless Steel Air Jets complement our complete line of engineered air nozzles which reduce energy use and noise levels while increasing safety. All EXAIR Air Jets and Nozzles meet OSHA static pressure requirements and CE safety standards.

For more information contact:
EXAIR Corporation
11510 Goldcoast Dr.
Cincinnati, OH 45249-1621
Phone: (800) 903-9247
Fax: (513) 671-3363
E-mail: techelp@exair.com
www.exair.com/ssaj.htm

Products and services
Air Wipes for blowoff, drying, cleaning and cooling of pipe, cable, extruded shapes, hose, wire
Electronic Flow Control system for compressed air
Digital Flowmeter for compressed air usage monitoring and waste detection
Ultrasonic Leak Detector for compressed air systems
Digital sound level meter for noise levels monitoring
Cold guns for cooling machining operations
Standard and high force air nozzles for every application
Air Jets for part ejection or hard-to-reach area
Reversible drum vacs for liquids pumping
Air amplifiers for ventilation or hot parts cooling
Chip trapper for chips, swarf and shavings cleaning
Back blow air nozzles for closed tubes cleaning
High Lift Chip Trapper for deep wells, pits and cisterns liquids recycling
Heavy Duty Vacs for dry materials and dust
Chip Vac for wet or dry chips picking up
Lightweight and powerful standard and deep hole vac-u-guns
Heat-resistant air amplifiers for hot air moving
Ion air knives for static charge removal
Ionizing bar for static elimination
Ion air wipes for for static elimination on pipes, extrusions and cable
Ion air cannon for cleaning and static electricity neutralizing
Ion air gun and jet for dust removal on hard-to-reach parts
Ionizing point for winding, rewinding or slitting operations
Vortex tubes for compressed air cooling
Adjustable spot coolers for compressed air cooling
Mini cooler for high speed operations tools cooling
Air knives for metal parts, webs or conveyors cleaning, drying and cooling
Safety air guns for production line environments
Safety air gun for wide area blowoff, cooling, and drying applications
Vacuum generators for pick and place operations