EXAIR Corporation


11510 Goldcoast Drive,
Cincinnati - Hamilton County
Ohio (45249)
Tel: +1 513-671-3322
Fax: +1 513-671-3363
Contact person:

News in detail

Super air wipes to dry, cool and clean small diameter wire, cable, pipes and hoses


Published: - 10/07/2018 Author: Scaccabarozzi, Ed. Staff
Super air wipes to dry, cool and clean small diameter wire, cable, pipes and hoses

EXAIR's new 3/8 inch Super Air Wipe produces a 360 degrees airstream that can blow off, dry, clean or cool the material passing through it. The split design can be clamped around continuously moving material such as wire, cable, pipe, hose and extruded shapes.

The 3/8 inch Super Air Wipe ejects a small amount of compressed air through a thin slotted nozzle that pulls in high volumes of surrounding room air. The airflow uniformly ejects from the 360 degrees of its inner diameter. Coupling brackets that hold each half of the 3/8 inch Super Air Wipe together can be latched together or removed quickly. Additional shims can be installed if more blowoff force is required. Air velocity can be varied with a pressure regulator and instant on/off control provides precision blowoff. Air consumption is 11.1 SCFM at 80 PSIG and the sound level is low at only 82 dBA.

Super Air Wipes are CE compliant and available from stock in aluminum and stainless steel in diameters from 3/8 inch (13mm) up to 4 inches (102mm). Large diameters up to 11 inches (279mm) are available from stock in aluminum. Applications include wiping wire; drying inks; cooling hot extruded shapes; and blowoff of water, plating, coatings and dust. Pricing starts at $286.

Products and services
Air Wipes for blowoff, drying, cleaning and cooling of pipe, cable, extruded shapes, hose, wire
Electronic Flow Control system for compressed air
Digital Flowmeter for compressed air usage monitoring and waste detection
Ultrasonic Leak Detector for compressed air systems
Digital sound level meter for noise levels monitoring
Cold guns for cooling machining operations
Standard and high force air nozzles for every application
Air Jets for part ejection or hard-to-reach area
Reversible drum vacs for liquids pumping
Air amplifiers for ventilation or hot parts cooling
Chip trapper for chips, swarf and shavings cleaning
Back blow air nozzles for closed tubes cleaning
High Lift Chip Trapper for deep wells, pits and cisterns liquids recycling
Heavy Duty Vacs for dry materials and dust
Chip Vac for wet or dry chips picking up
Lightweight and powerful standard and deep hole vac-u-guns
Heat-resistant air amplifiers for hot air moving
Ion air knives for static charge removal
Ionizing bar for static elimination
Ion air wipes for for static elimination on pipes, extrusions and cable
Ion air cannon for cleaning and static electricity neutralizing
Ion air gun and jet for dust removal on hard-to-reach parts
Ionizing point for winding, rewinding or slitting operations
Vortex tubes for compressed air cooling
Adjustable spot coolers for compressed air cooling
Mini cooler for high speed operations tools cooling
Air knives for metal parts, webs or conveyors cleaning, drying and cooling
Safety air guns for production line environments
Safety air gun for wide area blowoff, cooling, and drying applications
Vacuum generators for pick and place operations