Wire & Plastic Machinery Corp.


100 Franklin Street,
Bristol, CT -
United States (06010)
Tel: +1.860.583.4646
Fax: +1.860-589-5707
Contact person:

News in detail

PVC compounding plant: get the whole second-hand line from Wire & Plastic Machinery


Published: - 05/10/2021 Author: Di Maggio, EIC
PVC compounding plant: get the whole second-hand line from Wire & Plastic Machinery

Among the latest acquisitions of the US-based Wire Plastic Machinery Corporation, which specializes in the supply of used wire and cable equipment, is a complete PVC compounding plant.

The plant, which is still installed and located near Ft. Worth, TX, consists of:

PLA993
 – Welex Model 500 Mixer, 6" Extruder, 250 HP AC Motor; Gala Model 6C Underwater Pelletizer, Hydraulic Screen Changer

PLA994 – 4 1/2" Regrind Compounding Line with Gala Underwater Pelletizer, Screen Changer, Dryer, Classifier

PLA995 – Compounding Line - Farrel Mixer, Model CP 1000 Series II, Farrel 7" Extruder, Gala Underwater Pelletizer, Silos, Yr 1999 

PVC Compounding System Silos available (Yr 1997) - (2) 60' x 11', (9) 30' x 10' - PVC, (4) 40' x 9' - Liquid Plasticizers, (2) 22' x 9' - Water (2011)

Here is a list of the machines and equipment that have recently entered the WPMC warehouses.

CABLING:


CBR1386 – International Wire 30”, 18+24 Rigid Stranding Line, Dual Capstan, 96" Ceeco Floor Traversing TU, AC Drives
See Video

​​​​​CBR1388 – Cook BH-48, 48” Single Twist Cabling Line w/9 Position 24" PO, Concentric Taper
See Video

CBR1353 – 30" Ceeco Planetary Cabler Line, 12+ 18, 125 HP Saftronics DC, 2 - 20" Ceeco/Stolberger Dual Eccentric Tapers, Concentric Binder, 60" Dual Wheel Capstan, 84" Stolberger Column Type Takeup, 84" Hock Shaftless Drag Brake Payoff, Overhead Hoist/ Rails, R-L, Allen Bradley PLC
See Video


CBR1366
 – Ceeco 24 Wire 22" Rigid Serving Line w/Dual Eccentric Taper, 84" Belt Caterpuller, DC Drive, Portal Floor Traversing Takeup, (2) Davis Electric 84"Portal Gantry Payoffs, Six Bobbin Loader
See Video


CBR1382.1
 – 760mm Kinrei NB-760R Double Twist Bunchers, Yr 2006/1999 (Qty 4)

CBR1383.1 – 800mm SAMP BM800D, Double Twist Bunchers, Yr 1994 (Qty 5)

CBR1377 - 36" Dynamex Single Twist Cabler, STC-36, 20 HP ABB AC Drive, 8 position Payoff

CBR1378 - Edmands 36", 1+4 Bow Twister, 30" Dual Capstan, AC Motor

CBR1374 – TEC 30” Rotating Cradle Payoff Neutralizer, 3 Position, Model RCNPO-30/3

CBR1372 – 10" Tensor 6 Bobbin Planetary Strander, Model 200-6P, Year 2007


CBR1371
 – Nextrom 36 pos 16" Fiber Ribbon Strander, Type 330-74, Yr 2000

CBR1368 –  630mm Northampton B630 Double Twist Twinners, Yr 2000 (Qty 4)

CBR1352 – 560 mm Watson-Kinrei Model HK-560 D.T Buncher, Yr 2002 (Qty 3)

TBR217 – 24” 6W Ceeco Tubular Stranding Line, Core Payoff, Dual Capstan, AFA 84” TU
See Video

TBR215 – Ceeco 12 Wire, 24" Tubular Strander, 48" Dual Capstan, Portal Floor Traversing Takeup, 1m Hock Shaftless Payoff, 200 HP Parker DC Drive, Shaftless Cradles, Rope Brake Tensioning
See Video

TBR208 – 10"  Bartell Tubular Strander, 18 Wire, Model 18B64

TBR216 – Bartell 24 Wire 7", Model 24 B70 Tubular Strander, Outside String Up, AC Drives, Bartell 48" S/L Takeup, Year 2008


EXTRUSION:


EXPL464 – Jacketing Line, 4½" Davis Standard Extruder 24:1 L/D, Thermatic II, (2/2) 96" Ceeco Portal Floor Traversing Payoffs and Takeups, 42" Metering Caterpuller, 60" Davis Standard Pullout Caterpuller, Water Trough, Clinton Spark Tester, (2) 800mm Overhead Accumulators, R-L
See Video


EXPL466
 – Partial Jacketing Line, 6" Sterling Extruder, 24:1 L/D, DC Drive, Skaltek Portal Payoff, Model A20S, 96" AFA Portal Payoff, 72" Davis Electric Metering Belt Caterpuller, Water Trough, 50" MGS Pull Out Belt Caterpuller, Merritt Davis 48" Horizontal Accumulator
See Video

EXPL467 – THHN Line, 4½" Sterling Extruder, 20:1 L/D, 3½" Sterling Extruder 20:1 L/D, (2) 72" Pops Portal Floor Traversing Payoff, (2) Skaltek 1.2m U12P-4K Takeups, Trough, 32" Davis Standard Multipass Capstan, 24" Davis Standard & 36" Royle Belt Wrap Capstan, Clinton Spark Tester, (2) 24" Overhead Horizontal Accumulator, R-L
See Video

EXPL470 – XLPE Line (was 4 1/2" Davis Standard, no extruder/panel), (2) 84" Kabmatik Portal Gantry Payoffs, 48" Metering Belt Caterpuller, 54" Bartell Pullout Belt Caterpuller, Multi Pass Water Trough, Clinton Spark Tester, TEC 1.25" Portable Stripe Extruder, 3 Wheel Load Cell, (2) 84" Cabletrade Takeups (Guarded), L-R
​​​See Video


EXPL476
 - 3.5"/3.5"/2.5", 24:Cincinnati Milacron/Davis Standard THHN Line w/Trough, 20" Multipass Capstan

EXPL477 - 3.5"/3.5"/1.5" 24:1 Cincinnati Milacron THHN Line w/ Trough, 20" Viteck OH Accumulator, Merritt ST16 Dual Takeup w/Upgraded Drives, Yr 1997

EXPL475 - 3 1/2" Davis Standard 24:1 Extrusion Line, 32" Dual Capstan,Overhead Accumulator

EXPL457 - Davis Standard 31/2" 24:1 Thermatic III, 1" 25:1 Vertical Co-extruder Line w/ S.S Trough, Metaplast 50" Cat., Metaplast Shear, AB AC 1336 Impact Drives

EXPL449 – 2” Royle Primary Extrusion Line, 24” DCFPO, MPC, 24” Dual Reel TU

EXPL447 - Nextrom 80 mm 24:1 Loose Tube Line, Year 2001, w/ 12 pos. RST 300/12 Ribbon payoff strander, NMB 24-80D Extruder, 20m Water Trough, Caterpuller BO 25, Belt Capstan BC1000, 2.24m Portal Takeup FTU 3, Dancer ND 800P, Beta Lasermike Diameter Gage/Lump Detector, Belt M.M, Line Control Panels, Gel Injectors, Erocarb E50 Crosshead, JFS 100 Grease Pump, AE EVO Water Chiller

EXPL462 – Davis Standard 2.5” Ext Line w/Bartell 12", 24 wire Planetary

EXPL459 – 3 1/2" Davis Standard 24:1 Thermatic II Extrusion Line w/ RDN Vacuum sizer, Farris 24" Belt Caterpuller

EXPL456 – Davis Standard 2 1/2" 24:1 Thermatic III, 1" 25:1 Vertical Coextruder Line w/Stainless Steel Trough, Metaplast 24" Belt Caterpuller, Metaplast Shear

EXP1456 - Davis Standard, 2", 24:1, Model DS-20, 50HP DC Motor/Drive

EXP1457 - Davis Standard, 2", 24:1, Model DS-20, 50HP DC Motor/Drive

EXP1458 - Davis Standard, 2.5", 24:1, Model 250S, 50 HP DC Motor/Drive


EXP1454
 - 100 mm Davis Standard 30:1 Thermatic III Air Cooled Extruder

EXP1441 – 4.5” Cincinnati Milacron Extruder SZNE320, 30:1, Yr 1997


EXP1430
 – Davis Standard 1¼", 24:1 Vertical Striping Extruder


EXP1431
 – Davis Standard 3.5", 25:1 Thermatic III Extruder, Air Cooled, 125 HP DC (Qty 2)

EXP1427 – 100mm Maillefer Extruder NMC100-24D, Flender Gearbox, Yr 2006

EXP1416.1 –100mm Maillefer MXC 100-24D Extruder,  Air Cooled, Yr 2017

EXR202 – 3.5” Davis Standard Thermatic III Rubber Extruder, 15:1, Yr 1996

EXR208 – 4.5” Davis Standard Rubber Extruder, 20:1, Thermatic III, Roller Feed, Yr 1991


TAKEUPS:



TKU1648 – 2.2m Hall Portal Gantry Traversing Takeup, AB PLC (Qty 2)

TKU1664 – 16” Clipper SP-16, Dual Shaft Takeup, w/Dancer, Upgraded Drives

TKU1659 – 24” Davis Standard SP-24 Dual Shaft Spooler, AC Vector Drives, AB PLC

TKU1660.1 – 16” Clipper SP-16 Dual Shaft Rewinder, w/ Upgraded Drives

TKU1641 – 2.6m Skaltek U26T Portal Floor Traversing Takeup (Qty 3)

TKU1666 – 2.0m Skaltek U20-T Portal Floor Traversing Takeups (Qty 2)

TKU1654 - 50" Davis Electric Shaftless Takeup, AC Drive, Model TURA

TKU1576 - 36" MGS Dual Shaftless Takeup w/Common Traverse, Siemens DC Drive, AB Touchscreen Operator Station

 

PAYOFFS:



PAY2347 – 3.0m (120") Skaltek Payoff, Model A30S, Drag Brake

PAY2338 – 36" Hall Shaftless Driven Payoff w/5 HP Marathon AC Motor

PAY2340 – 36" Davis Electric Driven Payoff, Model PORA-36 (Qty 3)

PAY2336 – MGS Dual Tape/Ribbon Armor Payoff w/16' Vert, Motorized Accumulator

PAY2381 - Davis Electric 50", Model 30-50 PORA, Drag Brake Payoff, 32" OAW

PAY2293 - 630mm MGS Shaftless Driven Payoff w/ Vertical Dancer. 7.5 HP AC Vector Drive

REWINDERS:



RWD654 – Skaltek Dispatch Winding Line w/Skaltek AX26, 2.6m Driven Payoff, EC 60 Measuring Unit, Windak DP32 Palletizer, Clinton Sparker
See Video

RWD643 – EPS 6.5" Rewind Line, Model EM-50 w/Single Cone Flyer Payoff, Vertical Dancer

RWD647 – Windak Coiler, Model SW-6/GP-6 w/ Vertical Accumulator, AB AC Drives, PLC, Conveyor, Panel

RWD651 – 84"/48" Rewind Line w/Sterling Davis 84" Shaftless Driven Payoff, Reel-O-Matic 48" Rim Drive Takeup, Measuring Machine

RWD652 – 90"/48" Reel-O-Matic Rewind Line w/ Shaftless Driven Payoff, 48" Rim Drive Takeup, Measuring Machine

RWD649 - 12" Herzog Bench Mounted Spooler, Model 300ELTRA

CLR314 - 18" MGS Fully Automatic Dual Coiler, Model 902FAT18

 

MISCELLANEOUS:



BIN217 – Tensor Dual Concentric Binder, Model BC-4000-DSRL (NEW)

BRD507.1 – 24 Carrier Wardwell Speedmaster Braider, On Wire, with Head Guards, Complete with 30" Payoff and Takeup (Qty 3)

BRD509 – 36 Carrier TMW Cable Braider on Wire with Separate Capstan Drive

BRD501 – NanYang 16C Wire Braiders, Model GSB1A, Yr 2008 (Qty 26)

BRD503.1 – OMA 16C Textile Braider w/1250 mm PO/TU, Yr 2007 (Qty 2)

CAP923 – 24” Davis Standard Multipass (8X8) Capstan, Model WCT-24, 30’, DC Motor

CAP924 – AWM 20”, 9 pass Capstan, Model LTM-20-380-H, AC Vector Motor

CAP925 – AWM 20” Multipass (9X9) Capstan, 40’ , LTM20-280, DC Motor

CAP909 – 60" Midspan Single Flat Wheel Capstan w/ 5 HP AC Inverter Motor

CAP887 - 800mm Tensor Belt Wrap Capstan w/Idler Wheel, Model WC-18, Brushless Motor

CAT654 – 36" Metaplast Belt Caterpuller

CAT658 – 48" Bartell Belt Caterpuller, AC Drive, L-R Direction

CAT649 – Maillefer 1.2m Belt Caterpuller, Model BCA-12, L-R, Yr 2011

DAN592 – Viteck Overhead Accumulator Model HA-600-20, AC Motor

DAN594 – Custom Overhead Accumulator, 10x11 30” Sheaves, 40’ lg

DAN596 – Custom Overhead Accumulator, 10x10 16” UHMWPE Sheaves

DAN599 – Viteck Overhead Accumulator, Model HA-600-20

DAN604 – 14’ Vertical Dancer, 13x14, 14” Sheaves

DAN603 – Custom Floor Based Horiz Accum, 12x12, 30” Plastic Sheaves

DAN581 – Hall 20 feet Vertical Motorized Accumulator, 15" Sheaves, 20x21

MSC2587 - Bartell 2" BX Interlock Armoring line, Year 2008

MSC2553 - 5" BX Bartell Armoring Head, Year 2005, 108" Kalmar Payoff, 72" MGS Belt Caterpuller, 108" Bartell Portal Takeup

MSC3033 - Sweed Chopper on Gaylord Frame, Model 512AD

MSC2891 - Buhler Strand Wire Flattening Mill, Model EW 85 x 35, Siemens Drives and PLC, Year 1999

MSC2970 – Tensor Roll Formers, 44.5mm wide, NEW

MSC2971 – Tensor Roll Formers, 27mm wide, NEW


MSC2914
 – Tensor Corrugator, Model CHO-150-MT, AB Powerflex, Yr 2012

PLA977 – Killion DST-PVT3, 12 Feet Vacuum Sizer, Portable

PLA985 – Remcor Cornelius Chiller, Model CH750A (Qty 2)

PRE260 – Proton Preheater Model PH300-400

TPR399 - Qing Feng Dual Head Concentric Taping Line

WEL498 – Tensor Tape Welder, Model TML-150, Year 2012

REE444 - 30"x14.75"Tx16.5"OAWx16"Dx3"B, Steel Reels, Qty 71

REE450 - 30"Dx11"Tx13"OAWx15"Dx5"B, Steel Reels, Qty 271

REE451 - 22"Dx12"Tx14"OAWx12"Dx5"B, Steel Reels, Qty 96

REE452 - 24"Dx14"Tx16"OAWx12"Dx7"B, Steel Reels, Qty 221

REE453 - 48"Dx27"Tx30"OAWx26"Dx7"B, Wood/Metal Reels, Qty 22

REE454 - 1250mmx710mmx900mmOAWx630mmDx80mmB, Steel Reels, Qty 28

WRD1141 – SAMP MS 400 Rod Block, Catenary Arm Dancer, Winget Syncro Coiler

WRD1142 – SAMP R60 Rod Annealer, Cat Dancers, 800mm Drop Coilers

WRD1123 – Henrich 13 Die Rod Line, Annealer 800mm Bongard Coiler, Yr 1997


WRD1121
 – Vaughn J15, 15 Die Rod Line, Ceramic Draw Blocks, Niehoff R 500 Annealer, 300 HP/60 HP Mentor II DC Drives, Endex/Niehoff ECC 18 Drop Coiler, Niehoff WF 801 Drop Coiler

WRD1107 – SKET 13 Die Rod Breakdown Line w/Annealer, Bongard Drop Coiler

WRD1105 – Niehoff M85, 11 Die Rod Breakdown Line w/VG85 Annealer, Drop Coiler

WRD1114 – Niehoff 16W Drawing Machine Model MMH101, Annealer, Spoolers