Fasteners inspection gages and testing fixtures

Universal Punch Corporation, leader in the tooling and gauging industry, produces and sells fasteners inspection gages and testing fixtures.

Penetration gaging stations #9100
For cross recessed head screws ISO, DIN, IFI and JIS standards

Universal Penetration Gaging Stations provide an organized system utilizing one electronic digital indicator to measure the penetration depth of recesses in fasteners.  Designed for the shop floor or inspection room use, all steel parts are hard chrome plated for durability in harsh environments.  With the quick-change feature you can conveniently change probe assemblies, reducing inspection time. The system has SPC output capability and may be attached to most data processors.

Wobble gages #9200
For cross recessed head screws ISO, DIN, IFI and JIS standards

The Wobble Gage provides a means for determining the compatibility of cross recesses in the heads of screws with companion screw drivers and will indicate the point where deviation in the recess contours affects satisfactory driver engagement. Recesses which exhibit excessive wobble characteristics will cause poor screw driveability because of drive camout prior to attaining normal torque level, damage to recess, and/or accelerated driver wear.  Recess wobble gage fixture requires plug gageS, gage handles and pointers Specify when ordering.

Torsional testing fixtures #9300
For fastener torsional strenght testing ISO, DIN, IFI and JIS standards

Universal offers three fixtures to choose from that meet the   performance requirements for tapping and machine screws covered by ANSI/ASME, Aerospace, Automotive and ISO standards.  Universal can provide all of the testing attachments and accessories that are needed to perform these tests including standard or electronic torque wrenches for digital output of data.

Recess torsional strenght fixtures #9400
For recess torsional strenght testing military and aerospace standards

This fixture meets the performance requirements for testing #6 through 1/2” screws that are covered by aerospace and other  similar specifications.  Universal can provide all of the testing attachments and accessories that are needed to perform these tests including drivers bits, weights, and standard or electronic torque wrenches for digital output OF data. When Ordering specify requirements.

Protrusion height gages #9450
For measuring fastener head heights ISO, DIN, IFI and JIS standards

This gaging fixture can be set up to measure all types of fastener attributes such as head heights, body diameters, across flats, across corners, and lengths.  The interchangeable gaging plates are offered in both inch and metric sizes, certified and conforming to ANSI/ASME and ISO sTandards. The gaging plates are stainless steel, heat treated, and thermally stabilized.  Universals Gaging Plate hole sizes are measured by “height over ball” method and calculated to the actual sizes.

Nas protrusion height gages #9455
For measuring fastener head heights national aerospace standards

Provides a fast, accurate and repeatable means to measure fasteners and related products. designed to be used in harsh manufacturing environments.  Steel parts are hard chrome plated for durability.  This multipurpose gaging fixture can be set up to measure all types of aerospace and special fasteners.  The interchangeable gaging bushings are offered in both inch and metric sizes, certified and conforming to ANSI/ASME, ISO, and NAS standards.  The gaging bushings are made from high speed steel,  heat treated, thermally stabilized, and hard chrome plated for wear.  Gaging bushing hole sizes are measured by “height over ball” method and calculated to the actual sizes.

Digital nut measuring gages #9470
For measuring nut type products ISO, DIN, IFI and JIS standards

This portable lightweight gage provides a fast, accurate and repeatable way to measure the outside dimensions of nut type products.  Specifically designed with a digital scale for SPC, this gage is portable, yet durable, to be used in harsh manufacturing environments. The slide rod assembly and constant spring force ensure precise measurements throughout the entire range of travel. This multipurpose gaging fixture can be used for measuringacross flats (AF), across corners (AC), thicknesses, Bearing face diameters, flange diameters, and tapers.

Digital fastener length gages #9475
For measuring fastener lengths ISO, DIN, IFI and JIS standards

These Digital Length Gages are light-weight, yet durable, unit that provides a fast, accurate, and repeatable means to measure fasteners and related products.  The slide rod assembly ensures close alignment throughout the entire measuring range.  This system concentrates force onto supported bearing surfaces thereby minimizing any load transfer to the scale unit and increasing its service life.  The length gage is designed for the shop floor or inspection room use. This system offers an alternative to calipers, scales, and other devices and has SPC output capability.

Fastener recess checker gages #9500
For measuring fastener drives ISO, DIN, IFI and JIS standards

This gage model has been specifically designed to measure misalignment/runout for both external and internal fastener drives.  This gage offers a quick, accurate, and repeatable way to measure fastener recess runout without using collets. The single element probe uses one carrier with an indicator to inspect all types of fastener drive recesses from #4/M2 thru 1/2”/M12.  An optional External Drive Checker™ attachment can be purchased separately for inspecting external drives.  This item can be installed for inspection applications requiring larger motions of travel, such as across flats and across corners of a hexagon bolt.  By mounting an Electronic Indicator, SPC data can be down loaded to most data collectors. 

Web thickness gages #9600
For measuring self drilling / tapping screws ISO, DIN, IFI and JIS standards

This Drill Point Web Thickness Gage provides a fast, accurate, and repeatable way to measure the drill point dimensions of self drilling screws.  Specifically designed for mechanical or digital indicators, this gage has a range of 0” to 3/8”/ 9.5mm.  This gage is portable, yet durable, to be used in harsh manufacturing environments. Standard protected precision stroke bearings and a repeatable spring force ensure precise measurements throughout the entire range of travel.

TRI-LOBE gages #9700
For measuring Taptite screws ISO, DIN, IFI and JIS standards

TRI-LOBE™ gage provides a fast, accurate and repeatable way to measure the “C” dimensions of Taptite® screws.  Specifically designed for a mechanical or digital dial for SPC, this gage has a diameter range from #4 Through 3/4” (M3 - M19). This gage is portable, yet durable to be used in harsh manufacturing environments.  Protected precision stroke bearings assembly and a repeatable spring force ensure precise measurements throughout the entire range of travel.

Comparator major gages
For measuring screw or preform blanks ISO, DIN, IFI and JIS standards

This simple to use gage provides a fast, accurate, and repeatable way to measure fastener screw blank diameters and fastener dimensions.  Specifically designed for a mechanical or digital dial indicator for SPC.  this gage has a diameter range from .100”/ 2,5mm to 1”/ 25mm. standard features are adjustable reference stop, carbide anvils, and spindle lifting levers. durable to be used in harsh manufacturing environments.

Fastener gaging stations #10000
For measuring fastener screws ISO, DIN, IFI and JIS standards

Universal Fastener Gaging Stations can provide a fast, accurate and repeatable way to measure production nuts, screws, and rivets.  designed for mechanical or digital indicators for SPC data collection, each station can be configured for different product groups and sizes that range from #4(M2.5) Through 3/4”(M20).  Each gaging station can be secured and is durable enough to be used in harsh manufacturing environments.


More inormations here >>>