Search the product you need.
Covered sectors: wire - tube - fasteners - springs - coils and related fields.

Use filters to narrow your search results. Filter options appear on the right of your results. Click on a filter to apply it to your search. You can filter the results by selecting one or more product category and/or by nations
If you don't find what you're looking for, write an e-mail to staff@expometals.net, and we'll do our best to put you into contact with the right companies.

Process and storage tanks - heating exchangers


DRT Impianti manufactures and sells process and storage tanks - heating exchangers...


Process and storage tanks - heating exchangers

DRT Impianti Srl

Sludge treatment and drying systems


DRT Impianti manufactures and sells sludge treatment and drying systems


Sludge treatment and drying systems

DRT Impianti Srl

Waste water treatment plants


DRT Impianti manufactures and sells waste water treatment plants...


Waste water treatment plants

DRT Impianti Srl

Centering device for any kind of cables and tubes


Cometo cable centering device model CC is composed by four tempered (62-63 HRC) and grinded rollers to guide any kind of cables and tubes. The rollers can be chrome plated on customer demand only for orders of more than 5 devices.


Centering device for any kind of cables and tubes

COMETO SRL

Cutting unit for round or shaped profiles


Cometo cutter ECM05 can handle both round or shaped profiles up to maximum diameter 5mm. The cutter is available with “bush to bush” blade or oper blade; the cut timing is 0,15seconds. ECM05 is driven by brushless motors; but is available also in pneumatic version, cheaper than the motorized one, to save customers’ budget; or also available in electronic version.


Cutting unit for round or shaped profiles

COMETO SRL

Cutting unit for wires, plates and profiles


Cometo cutter model TAG10 is suitable for the cutting of wire from minimum diameter 1mm to maximum diameter 10mm. The cutting unit TAG10 also offers the possibility to cut plates and profiles with maximum width 10mm. The unit is available in three versions...


Cutting unit for wires, plates and profiles

COMETO SRL

Electronic feeder for round or shaped wires


Electronic wire feeder Cometo EFM3116, suitable for round or shaped wires with maximum diameter 10mm. The feeder is composed by three upper and three lower rollers, installed on two different housings fed by synchronized motors.


Electronic feeder for round or shaped wires

COMETO SRL

Electronic traverse unit for drawing or rewinding lines


Electronic traverse unit model STRE designed to improve the quality of the winding of metallic wires, cables and plastic profiles. STRE traverse unit is mainly employed on drawing and re-winding lines and enables to carry out controlled windings on coils of any shape.


Electronic traverse unit for drawing or rewinding lines

COMETO SRL

Feeder for round or profiled wire


Wire feeder suitable for all application where it is necessary to push or pull the wire round or profiled, both in ferrous or non ferrous material. The AL feeder is used to facilitate the wire string-up into whatever type of machine. The Cometo AL feeder can be applied to...


Feeder for round or profiled wire

COMETO SRL

Guide rollers for metallic wires, cables, tubes or plastic profiles


Guide rollers made of stell alloy UNI:X205 Cr12KU to guide metallic wires, both round or shaped, cables, tubes or plastic profiles. The rollers are heart hardened at 61/63HRC, to grant long-lasting performances ...


Guide rollers for metallic wires, cables, tubes or plastic profiles

COMETO SRL

Mechanical traverse unit for spooling/take up machines


Mechanical traverse unit model STR suitable for installation on spooling/take up machines both new and earlier models. This unit is equipped with a pneumatic reversing system allowing its carriage to be guided on hardened steel rods by means of a toothed pulley belt. Its continuous working reliability and minimal maintenance ensure’s suitable winding of the wire.


Mechanical traverse unit for spooling/take up machines

COMETO SRL

Pre-straightening machine


Pre-straightening machine to facilitate the wire string-up into the wire drawing machine or into bolt and screw making machines and other types of wire forming machines. Suitable for wire diameter range from 14 up to 30mm Adjustable straightening rollers with digital position indicator. Self-centering advancer rollers with hydraulic locking and releasing system ....


Pre-straightening machine

COMETO SRL

Roller guides for round wires and strips


Within its wide products range Cometo offers the wire guide model GAP, suitable for both round wires and strips. The GAP structure makes it possible to assemble the rollers in different configurations, horizontal, vertical or oblique in order to suit the different materials shapes. The equipment is provided with self-centering wheel opening system in order to keep the rollers centerline.


Roller guides for round wires and strips

COMETO SRL

Roller guides for wire and cable


Among the wide range of Cometo products we find the wire guide model GQ, suitable for wire or cable diameters from 3 up to maximum 30mm


Roller guides for wire and cable

COMETO SRL

Rotating die-holders for drawing machines


The Cometo rotating die-holder CFRMD is suitable to be installed on drawing machines. Its rotary movement insures a better wire lubrication when running into the die and helps the die to keep its shape without deforming it. CFRMD is available with or without soap box. Cometo can also offer a different box from the one used for the dry drawing.


Rotating die-holders for drawing machines

COMETO SRL

Straightening and cutting machines


Cometo MTF22 wire straightening and cutting machine is suitable for material diameters range going from 0,8 up to a maximum of 10mm and cutting length up to 3 meters...


Straightening and cutting machines

COMETO SRL

Straightening machine for cutting and marking Tig rods


The MTF20 machine is appositely studied for the cutting and marking of tig welding rods. It processes aluminium, bronze, stainless steel and carbon steel with diameters 1,2 – 1,6 – 2,0 – 2,4 – 3,2 – 4,0 – 5,0mm and allows to mark both rods-ends at fixed lengths of 1000mm or 914mm.


Straightening machine for cutting and marking Tig rods

COMETO SRL

Straightening rollers and bearings


Bearings model CA: high quality rigid ball bearings ground to high tolerance of concentricity, suitable for wire diameters appoximately 3mm. 90° “V” groove; “U” grooves and any other groove profile available upon request. Straightening rollers model CAR: Straightening rollers with single row bearing for medium duty applications, this rollers have a higher outside ring allowing greater groove depth suitable for approximately 3mm-9mm wire diameters. Customized groove available upon request.


Straightening rollers and bearings

COMETO SRL

Wire payoffs for coils or bobbins


Cometo manufactures and sells wire payoffs suitable to unwind round or profiled wires from coils or bobbins. Three models available...


Wire payoffs for coils or bobbins

COMETO SRL

Wire straightener for big wires and tubes


Wire straightener made of steel with rollers diameter 110mm in material K12, hardened 61/63 HRC, suitable for straighteing of big diameter wires, and for bolts and pipes manufacturing.


Wire straightener for big wires and tubes

COMETO SRL

Wire straightener for round wire, cables and tubes


Wire straightener in steel with rollers diameter 150mm, suitable for the processing of full round wire diameter from 16mm to 30mm, and of cables and pipes to a diameter of 45mm.


Wire straightener for round wire, cables and tubes

COMETO SRL

Wire straighteners for drawing lines


A very versatile wire straightener in steel mainly used on wire drawing lines before the take up, and for applications which require a minimal straightening level...


Wire straighteners for drawing lines

COMETO SRL

Wire straighteners for metallic meshes production


Wire straightener made of steel, suitable for metallic meshes production or for any application requiring minimum space for the straightener installation.


Wire straighteners for metallic meshes production

COMETO SRL

Wire straighteners for ribbed wire used in constructions


Sturdy wire straightener made of steel, suitable for wire stretching or straightening; particularly projected for ribbed wire used in constructions. This straightener is equipped with 110mm rollers and can handle material with diameter range going from 6mm up to 20mm without the need of changing the rollers.


Wire straighteners for ribbed wire used in constructions

COMETO SRL

Wire straighteners for springs and screws manufacturing machines and wire benders


Wire straightener made of steel; enables very good straightening accuracy thanks to its centesimal tolerances. For this reason, this device is particularly suitable on machines for: springs and screws manufacturing, wire bending machines, machinery for special processing and applications where straightening precision is more critical.


Wire straighteners for springs and screws manufacturing machines and wire benders

COMETO SRL

3D Benders for wire, flat wire, tube or strip


Ambrosetti Daniele sells 3D Benders for wire, flat wire, tube or strip. Here following the available models...


3D Benders for wire, flat wire, tube or strip

Ambrosetti Daniele

Plate rolls for sheet metal and profiles


Daniele Ambrosetti sells strong, highly productive, reliable and simple to operate bending rolls for sheet metal and profiles.


Plate rolls for sheet metal and profiles

Ambrosetti Daniele

Narrow your results

Testimonials

Alberto Gabika, Heroslam - Spain: "Expometals is a great marketing partner for us. The staff is proactive and helpful and the exposure of our brand has improved since we started to work with them."

René Branders, FIB Belgium s.a. - Belgium: “We have been online for a few years and are very satisfied with Expometals. The Google ranking from their website is excellent. The platform is simple to manage and efficient!”

Pietro Tocchetti, Cometo S.n.c. - Italy: “We received several requests for quotation through the portal, and more than one brought to a successful conclusion.”

Cristian Saraceno, Tramev S.r.l. - Italy: “For a company pursuing internationalization, Expometals is an effective tool, as it allows to increase the visibility in the whole world.”

Follow us on




Compatible with

Numbers in real time

235,312 annual visits
12,329 news since 2002
70,574 e-mail records
7,657 companies
348 online exhibitors
3,860 products

Contact us

Headquarters
via Manzoni 75 - 23868 Valmadrera (LC) Italy
Tel.: +39 0341 580139
Mobile: +39 349 8385199
Skype: expometals
E-mail: staff@expometals.net