Search the product you need.
Covered sectors: wire - tube - fasteners - springs - coils and related fields.

Use filters to narrow your search results. Filter options appear on the right of your results. Click on a filter to apply it to your search. You can filter the results by selecting one or more product category and/or by nations
If you don't find what you're looking for, write an e-mail to staff@expometals.net, and we'll do our best to put you into contact with the right companies.

Steel Plant Furnaces: Bar Walking Beam and Walking Hearth Furnace Systems


Can-Eng Roller Walking Beam/Walking Hearth Furnace systems have fully integrated hardening, quenching and tempering for high volume and continuous production up to 140,000 lbs/hr (~65 metric tons/hr).


Steel Plant Furnaces: Bar Walking Beam and Walking Hearth Furnace Systems

Can-Eng Furnaces International Ltd

Steel Plant Furnaces: Car Bottom Furnace Systems


Can-Eng’s Car Bottom Furnaces are ideal for a variety of thermal treatments including stress relieving, annealing, heating for hot work, austenitizing and normalizing. Can-Eng designs operate up to 2400 degrees Fahrenheit, have optimum circulation of hot gases and allow for easy scale clean out.


Steel Plant Furnaces: Car Bottom Furnace Systems

Can-Eng Furnaces International Ltd

Steel Plant Furnaces: Chain Conveyor Furnace Systems


Can-Eng's Chain Conveyor Furnace Systems are ideal for conveying heavy loads with high loading densities, such as tubes, bars, leaf and coil springs, forgings castings, lift truck forks and suspension components. Available as open chain non-connected strand designs, or chains with a variety of cross flight configurations.


Steel Plant Furnaces: Chain Conveyor Furnace Systems

Can-Eng Furnaces International Ltd

Steel Plant Furnaces: General Roller Hearth Furnace Systems


Can-Eng Roller Hearth Furnaces are workhorses for heat treating a great variety of materials. Whether you are annealing, bright annealing, normalizing reheating, stress relieving or tempering, Can-Eng Roller Hearth furnaces are capable at operating up to 2100 F (1150 C) for alloy roll designs and 2300 F (1260 C) for Ceramic Roll Designs.


Steel Plant Furnaces: General Roller Hearth Furnace Systems

Can-Eng Furnaces International Ltd

Steel Plant Furnaces: General Walking Beam and Walking Hearth Furnace Systems


Can-Eng Roller Walking Beam/Walking Hearth Furnace systems are capable of processing both symmetrical and non-symmetrical parts at a capacity up to 140,000 lbs/hr (~65 metric tons/hr).


Steel Plant Furnaces: General Walking Beam and Walking Hearth Furnace Systems

Can-Eng Furnaces International Ltd

Steel Plant Furnaces: Plate Quench and Temper Furnace Systems


Can-Eng Roller Hearth Furnaces for plate quench and temper applications utilize a design methodology to minimize roll pick-up and produce the highest quality plates with very tight temperature uniformity.


Steel Plant Furnaces: Plate Quench and Temper Furnace Systems

Can-Eng Furnaces International Ltd

Steel Plant Furnaces: Roller Hearth Plate Normalizing Furnace Systems


Can-Eng Roller Hearth Furnaces for plate normalize applications utilize a design methodology to minimize roll pick-up and produce the highest quality plates with very tight temperature uniformity.


Steel Plant Furnaces: Roller Hearth Plate Normalizing Furnace Systems

Can-Eng Furnaces International Ltd

Steel Plant Furnaces: Rotary Hearth Furnace Systems Steel Applications


Can-Eng Rotary Hearth Furnaces have been utilized in a wide variety of applications for both Reheating and Heat Treating operations. System capacity ranges up to 60 tph and consist of both rotary table and rotary ring designs.


Steel Plant Furnaces: Rotary Hearth Furnace Systems Steel Applications

Can-Eng Furnaces International Ltd

Steel Plant Furnaces: Tube and Bar Annealing Furnace Systems


Can-Eng Roller Hearth Tube /Bar Annealing systems allow for high volume continuous annealing of steel bars or tubes under a wide variety of atmospheres: Open, N2, EXO gas, ENDO gas, N2/methanol, and 100% H2.


Steel Plant Furnaces: Tube and Bar Annealing Furnace Systems

Can-Eng Furnaces International Ltd

Steel Plant Furnaces: Tube Quench and Temper Furnace Systems


Can-Eng Tube Quench and Temper furnaces lines can be configured as either Walking Beams or Pushing Chain Conveyors and are integrated with in-line water spray quenching for production capacities up to 50 tph.


Steel Plant Furnaces: Tube Quench and Temper Furnace Systems

Can-Eng Furnaces International Ltd

Automatic box changer with mini-lots option and automatic rotation - VERTIBOX


It is an equipment to be used for the automatic changing of the boxes to collect small metal parts from the production machines. This makes it possible to form homogeneous lots for quality control and packaging in constant quantities, automatically without operator intervention.


Automatic box changer with mini-lots option and automatic rotation - VERTIBOX

AGIBI PROGETTI Srl

Furnaces with conveyor belt


Furnaces with conveyor belt: the most important feature of these furnaces is the possibility to verify immediately the effect of thermal treatment on the products. They are usually built on wheels, with adjustable loading and unloading heights; they are used in-line with spring production machines. The problem of smoke that requires expensive extraction systems on the whole...


Furnaces with conveyor belt

AGIBI PROGETTI Srl

Furnaces with horizontal chamber


Furnaces with horizontal chamber: Furnaces with horizontal chamber with high energy saving thanks to their hermetic structure. The baskets for the charge of materials can be constructed in modular dimensions to use all the internal space available. This category includes both ventilated furnaces for tempering or stress relief and hardening furnaces with or without controlled atmosphere.


Furnaces with horizontal chamber

AGIBI PROGETTI Srl

In line brushing machine for steel wires - WIREBRUSH SH4


AGIBI Progetti is pleased to present the new in line brushing machine "WIREBRUSH SH4" for Ø1-4 mm wires, including neutral wire-rectifier, epicycloid-moving brushes, vacuum cleaner and optional precision lubrication. This new patented machine is equipped with three interchangeable high-efficiency filter cartridges.


In line brushing machine for steel wires - WIREBRUSH SH4

AGIBI PROGETTI Srl

No Smoke System


No Smoke System: PATENTED SYSTEM FOR REMOVAL OF OILY SMOKE, ADVANTAGIOUS FOR THE PROTECTION OF THE OPERATORS HEALTH AND THE WORKING ENVIRONMENT. NSS • No Smoke System


No Smoke System

AGIBI PROGETTI Srl

Oilers for small metal parts


Oilers: this kind of machine has been designed to uniformly deposit in the production line, or with manual supply, a very light film of protective oil on the small metal parts.


Oilers for small metal parts

AGIBI PROGETTI Srl

Programmable pans lifter for small metal parts - ELT


This lifting equipment for small parts occupies very little space and is useful for filling large chests or to supply machines with high loading levels.


Programmable pans lifter for small metal parts - ELT

AGIBI PROGETTI Srl

Tunnel furnaces


Tunnel furnaces: Small ventilated electrical continuous furnaces for the treatment of springs of small sizes and with difficult shapes. Two versions are available, one with transport on a load vibrating highly polished steel channel or with a belt of small basin belt. The loading height is very low in order to receive springs from...


Tunnel furnaces

AGIBI PROGETTI Srl

Vertical chamber furnaces


CONTINUOUS ELECTRIC FURNACE WITH VERTICAL CHAMBER: New generation of furnaces designed for in-line working where energy saving is important and there are space problems: • Energy saving, thanks to the vertical construction, highly insulated and without transport unit, that run outside the furnace; this is a belt furnace with the same consumption of a chamber furnace; • Space-saving, the vertical construction can do the job of a furnace of 6 to...


Vertical chamber furnaces

AGIBI PROGETTI Srl

Vertical cylinder furnaces


Vertical cylinder furnaces: ELECTRICAL CYCLONE-TYPE FURNACES of old design built only upon specific request of the customer...


Vertical cylinder furnaces

AGIBI PROGETTI Srl

Vibrating loading hopper - TCV


It can be used for example as supply dispenser for machines with automatic loading. Combined with the ELT300, it can become an automatic dispenser for small part working lines.


Vibrating loading hopper - TCV

AGIBI PROGETTI Srl

Bundling and strapping units


For the straight materials, we can supply from the simple manual formation and bundling pocket to the fully automated formation pockets with automatic strapping and wrapping units.


Bundling and strapping units

UDM Srl

Calibration pass drawing units with cut to length system


For the stamping industry we can supply calibration pass drawing units and in exit a cut to length system. The cutting system for sizes up to approx. 30mm uses a chipless system helping to reduce wastage.


Calibration pass drawing units with cut to length system

UDM Srl

Coilers and recoiling lines


Not all material must be straight, we can supply coiler of all type such as level wound coilers as well as pancake coilers for the fitment in exit of drawing lines or recoiling lines.


Coilers and recoiling lines

UDM Srl

Cold rolling mills for round, flat, square or special profiles


Our cold rolling lines are designed for production of special profiles as well as rounds, squares and flats. Are units are designed following the customer specification and process needed.


Cold rolling mills for round, flat, square or special profiles

UDM Srl

Collect pockets for bars


From a simple collection pocket to a constant level pocket. Single or double.


Collect pockets for bars

UDM Srl

Combined drawing lines


With a range of lines for sizes of 2mm to 50mm+ our lines are designed with automation in mind. Our latest lines provide automatic adjustments with memory function to speed up changeovers when coupled with our straightening machines and entry services.


Combined drawing lines

UDM Srl

Narrow your results

Testimonials

Alberto Gabika, Heroslam - Spain: "Expometals is a great marketing partner for us. The staff is proactive and helpful and the exposure of our brand has improved since we started to work with them."

René Branders, FIB Belgium s.a. - Belgium: “We have been online for a few years and are very satisfied with Expometals. The Google ranking from their website is excellent. The platform is simple to manage and efficient!”

Pietro Tocchetti, Cometo S.n.c. - Italy: “We received several requests for quotation through the portal, and more than one brought to a successful conclusion.”

Cristian Saraceno, Tramev S.r.l. - Italy: “For a company pursuing internationalization, Expometals is an effective tool, as it allows to increase the visibility in the whole world.”

Follow us on




Compatible with

Numbers in real time

247,789 annual visits
11,360 news since 2002
69,962 e-mail records
7,616 companies
340 online exhibitors
3,727 products

Contact us

Headquarters
via Manzoni 75 - 23868 Valmadrera (LC) Italy
Tel.: +39 0341 580139
Mobile: +39 349 8385199
Skype: expometals
E-mail: staff@expometals.net