Search the product you need.
Covered sectors: wire - tube - fasteners - springs - coils and related fields.

Use filters to narrow your search results. Filter options appear on the right of your results. Click on a filter to apply it to your search. You can filter the results by selecting one or more product category and/or by nations
If you don't find what you're looking for, write an e-mail to staff@expometals.net, and we'll do our best to put you into contact with the right companies.

Self-bearing torque meter: TMP – MAX 1500 NM


Self-bearing torque meter with self-centring grippers also for breaking tests on cables, wires and ropes. Computer and software included.


Self-bearing torque meter: TMP – MAX 1500 NM

EASYDUR Srl

Spring tester 2C series


Equipment capable of carrying out compression and tensile tests. Suitable for spring tests. The equipment is manually operated. Fast and slow speed can be selected.


Spring tester 2C series

EASYDUR Srl

Spring tester for measuring "SIDE LOAD"


The Side Load spring tester is a system for measuring side load with platforms of 6 loading cells, equipped with software with 3D graphics for studying spring behaviour.


Spring tester for measuring "SIDE LOAD"

EASYDUR Srl

Spring tester PC series


Equipment capable of carrying out tensile and compression tests. This is a manual operation instrument offering two speeds, fast and slow. Two adjustable stops are provided for sets of tests.


Spring tester PC series

EASYDUR Srl

Tab model vision system with camera for spring length and diameter on board the machine


An innovative instrument that allows 100% control over standard and night time production. This system is capable of measuring and correcting both spring length and diameter coil by coil. Thanks to new developments in our programme, now spring pitch can also be measured on each coil.


Tab model vision system with camera for spring length and diameter on board the machine

EASYDUR Srl

Testing machine for car clutches and clutch discs FRIZ. 2001


Clutches and clutch discs: for measuring the contact pressure while loading and unloading as well as for measuring the stroke of the clutch thrust plates. For determining the elasticity of linings as well as the elasticity of compression between the lining and the hub of the clutch disc.


Testing machine for car clutches and clutch discs FRIZ. 2001

EASYDUR Srl

Torquemeter TM series


This newly designed, numerical control torquemeter is capable of carrying out right-hand and left-hand torsion tests including at break. It is a freestanding structure with precision ball-type guides.


Torquemeter TM series

EASYDUR Srl

Torquometer TR series


Equipment manually operated for right and left torque control on springs with two adjustable stops for the angular position, with horizontal enbloc structure and ball circulation accuracy guides. Its high-definition electronic cell allows torque measurements while the angular positions are controlled by digital encoder with 0.1 degree minimum indexing.


Torquometer TR series

EASYDUR Srl

Universal testing instruments 3MZ series


It is a universal testing machine capable of carrying out tensile, compression, bending, and shearing tests. Operation is manual, semi-automatic, and automatic.


Universal testing instruments 3MZ series

EASYDUR Srl

Universal testing instruments Dyno series


It is a universal testing machine capable of carrying out tensile, compression, bending and shearing tests. Operation is manual, semi-automatic, and automatic. The test instrument can be modularised taking into account that the structure can house 3 permanently installed load cells for compression tests, and tensile grips for tests, including at break.


Universal testing instruments Dyno series

EASYDUR Srl

Bow Skip Machines


- Flyer with high tensile material bows, for high speed performances. - Spool payoff located in a stationary cradle equipe with anti-tilting device. - High stiffness multi frame fixed on the floor. - Wire back tension kept constant from full to empty spool payoff. - Wire break detector for each payoff unit...


Bow Skip Machines

MFL GROUP

Coil Solutions for Wire Treatment Lines


- For low, medium, high carbon or stainless steel wire. - For heat and/or coating and/or cleaning treatment processes. - Payoff...


Coil Solutions for Wire Treatment Lines

MFL GROUP

Coilers for Drawing Lines


For low, medium, high carbon or stainless steel wire...


Coilers for Drawing Lines

MFL GROUP

Double Twist Machines


- For the production of steal strand in Sele, Warrington, Fillee and Warrington-Seale configuration. - Without bow rotor, to reduce maintenance cost. - Internal post forming rollers units, one horizontal and one vertical...


Double Twist Machines

MFL GROUP

Draweasy for Drawing Lines


- For low, medium or high carbon rod. - Rod inlet diameter from 5,5 mm up to 24 mm. - Production speed up to 6 m/s.


Draweasy for Drawing Lines

MFL GROUP

Low Relaxation PC Strand


- To produce low relaxation pre-stressed concrete (P.C.) strand under all the international standards - From 6,3 mm (1/4”) to 28,6 mm (1-1/8”) strand diameter range. - Bow skip strander: DIN900, DIN1000, DIN1120 or DIN1250 spools - From 1+2 to 1+6 wires - Possibility to install an additional 12 wires planetary or tubular strander.


Low Relaxation PC Strand

MFL GROUP

Low Relaxation PC Wire


- To produce low relaxation pre-stressed concrete (P.C.) wire under all the international standards. - Possibility to make bright, galvanized, galfan and bridge wire. - From 3,0 to 13,0 mm wire diameter range. - Payoff from spools or from coils...


Low Relaxation PC Wire

MFL GROUP

Payoffs for drawn wire for Drawing Lines


- For low, medium, high carbon or stainless steel wire. - Payoff speed dependable upon payoff model. - Coil payoff...


Payoffs for drawn wire for Drawing Lines

MFL GROUP

Payoffs for wire rod for Drawing Lines


- For low, medium, high carbon or stainless steel wire rod. - Wire rod diameter from 5,5 mm up to 24 mm. - Payoff speed dependable upon payoff model.


Payoffs for wire rod for Drawing Lines

MFL GROUP

Planetary Machines


- For the production of steel strands and ropes. - Able to produce cables or strands in one or multi pass. - The rotating structure is sustained on bearings for spool up to 800 mm diameter, for spool bigger than 800 mm diameter the structure is sustained on gesadur rollers...


Planetary Machines

MFL GROUP

Sensor or Dancer Arm Drawing Machines


- For low, medium, high carbon, stainless steel or zinc and zinc alloys wire. - Drawing speed dependable upon machine setup. - Possibility to have ceramic or tungsten carbide coated capstans. - Very high efficiency Mario Frigerio patented gearbox (>95% on the entire speed...


Sensor or Dancer Arm Drawing Machines

MFL GROUP

Sheathing Lines


- Rotating payoff from 1.600 to 2.600 or portal payoff for spools from 1.250 mm to 3.600 mm or motorized cantilever for spools from 800 mm to 1.600 mm. - Accumulator for unwound wire collection. - Main extruders from Ø 80 mm to Ø 160 mm.


Sheathing Lines

MFL GROUP

Spool Solutions for Wire Treatment Lines


- For low, medium, high carbon or stainless steel wire - For heat and/or coating and/or cleaning treatment processes - Payoff


Spool Solutions for Wire Treatment Lines

MFL GROUP

Spoolers for carbon or stainless steel wire


For low, medium, high carbon or stainless steel wire Horizontal or vertical spool axis versions Single or multiple spool sizes versions Single or double position versions...


Spoolers for carbon or stainless steel wire

MFL GROUP

Tubular Machine


- For the production of steel strands and ropes. - Machine placed on a rigid steel frame with rotor support, fixed on the floor for an easy installation. - Machine able to work in torsion or total back twist with the possibility of partial back twist. - Wire back tension kept constant from full to empty spool payoff...


Tubular Machine

MFL GROUP

Wet Drawing Machines


MARIO FRIGERIO makes wet drawing lines for low and high carbon wire. Dedicated solutions for the production of steel cord, hose wire, saw wire and welding wire (coppered and copper-free). - 11/21/25/28 drawing steps - 3/6 axis


Wet Drawing Machines

MFL GROUP

ASC100 - The flexible solution: three different configurations changeable by the operator


Equipped with considerable flexibility of use, it can work both with vertical and horizontal axis and in three different positions with respect to the machine.


ASC100 - The flexible solution: three different configurations changeable by the operator

Microstudio Srl

Narrow your results

Testimonials

Alberto Gabika, Heroslam - Spain: "Expometals is a great marketing partner for us. The staff is proactive and helpful and the exposure of our brand has improved since we started to work with them."

René Branders, FIB Belgium s.a. - Belgium: “We have been online for a few years and are very satisfied with Expometals. The Google ranking from their website is excellent. The platform is simple to manage and efficient!”

Pietro Tocchetti, Cometo S.n.c. - Italy: “We received several requests for quotation through the portal, and more than one brought to a successful conclusion.”

Cristian Saraceno, Tramev S.r.l. - Italy: “For a company pursuing internationalization, Expometals is an effective tool, as it allows to increase the visibility in the whole world.”

Follow us on




Compatible with

Numbers in real time

235,227 annual visits
12,330 news since 2002
70,581 e-mail records
7,657 companies
348 online exhibitors
3,860 products

Contact us

Headquarters
via Manzoni 75 - 23868 Valmadrera (LC) Italy
Tel.: +39 0341 580139
Mobile: +39 349 8385199
Skype: expometals
E-mail: staff@expometals.net