Search the product you need.
Covered sectors: wire - tube - fasteners - springs - coils and related fields.

Use filters to narrow your search results. Filter options appear on the right of your results. Click on a filter to apply it to your search. You can filter the results by selecting one or more product category and/or by nations
If you don't find what you're looking for, write an e-mail to staff@expometals.net, and we'll do our best to put you into contact with the right companies.

Hexagonals marked bars


By extrusion from a roll or bar. Usually delivered in a raw state and commercial length from 3 to 6 m, but on request can be supplied in fixed lengths. Each product is executed custom marking for the customer. The steels from 6 to 75 mm are supplied with beveled ends.


Hexagonals marked bars

Steelgroup

Patented steel wires


Patented steel wires: ITA S.p.A. has two technologically advanced heat treatment systems of lead patenting, capable of ensuring efficiency and process control in full compliance with the highest...


Patented steel wires

Steelgroup

PC Strands and post-tension strands


PC Strands and post-tension strands: CB Trafilati Acciai S.p.A. produces steel strands for prestressing of concrete or for post-tension applications, for the realization of big projects as nuclear power plants, highways, railways, viaducts and stay-cable bridges, beams and slabsfor prefabricated civil or industrial...


PC Strands and post-tension strands

Steelgroup

PC Wire


PC Wire: CB Trafilati Acciai S.p.A. produces steel wire in coils or bars, simple or threaded for manifacturing of concrete sleepers for high speed railways or subways, with smooth or indented surface according to customer's need.


PC Wire

Steelgroup

PCCP Wire


PCCP Wire: CB Trafilati Acciai S.p.A. produces high quality steel wire for the manifacturing of PCCP (Prestressed Concrete Cylinder Pipe), for the realization of projects for water transport for the develpoment of...


PCCP Wire

Steelgroup

Peeled round bars


Peeled round bars: Obtained for peeling bars with subsequent rolling. Diameter from 30 to 100 mm. Usually delivered in a raw state and commercial length from 3 to 6 m, but on request can be supplied in fixed lengths.


Peeled round bars

Steelgroup

Phosphated steel wires


Phosphated steel wires: ITA S.p.A., in addition to the production of a whole range of stelmor phosphated products, has a heat treatment system of lead patenting for the production of phosphated steel wires used for the production of lifting ropes for the industrial and extractive sector, people transport ropes, fishing ropes, off-shore application, hoses armouring, transmissions...


Phosphated steel wires

Steelgroup

PPWS wire for suspension bridges


PPWS wire for suspension bridges: CB Trafilati Acciai S.p.A. produces high-perfomance steel wire for the construction of suspension bridges with...


PPWS wire for suspension bridges

Steelgroup

Round bars


Round bars: Cold drawn from roll or bar. Diameter from 3 to 100 mm. Usually supplied untreated, in 3 to 6 m commercial lengths.


Round bars

Steelgroup

Special profiles


Special profiles: By extrusion from a roll or bar. Usually delivered in a raw state and commercial length from 3 to 6 m, but on request can be supplied in fixed lengths. Upon customer request, the steel rod obtained by drawing can be supplied with special profiles, profiles drip edges round, polygonal.


Special profiles

Steelgroup

Square bars


By extrusion from a roll or bar. Sections from 4 to 80 mm. Usually delivered in a raw state and commercial length from 3 to 6 m, but on request can be supplied in fixed lengths. Each product is executed custom marking for the customer. The steels can be supplied on request with chamfered ends.


Square bars

Steelgroup

Tempered steel wires


Tempered steel wires: High resistance tempered steel wires for the automotive and aerospace industry or, more in general, anywhere there is a use of elastic components in critical conditions with strong mechanical stresses such as...


Tempered steel wires

Steelgroup

Accumulators


CALMEC has produced both vertical and horizontal accumulators. They are available with both pneumatic and electric movement of the traveling sheave assembly. Some important factors to consider in the design of an accumulator are the size range of product to be run, the amount of accumulation required, the product tension, and building size restrictions


Accumulators

Calmec Precision Ltd

Capstans


Calmec produces multiple types of single wheel Capstans, used as constant tensioning devices for pulling single wires, multiple wires, cable, or conduit. Belt Wrap Capstans for small wires or large cables range from 12” to 72” in diameter, with speeds up to 1000 feet per minute. Steel Drum Capstans for conduit or armored cable can run in conjunction with Armoring Machines.


Capstans

Calmec Precision Ltd

Cater Pullers


Cater Pullers are used as a means of providing consistent pull of conduit and cables, usually as the product is exiting out of a prior process such as armoring or extruding, or even from a pay-off. They can pull a wide variety of flat or round armor as large as 5" in diameter, and as small as 1/4" in diameter. Our Cater Pullers come with different styles of belts, depending on the application.


Cater Pullers

Calmec Precision Ltd

Coil winders


Coil Winders are used for production winding of small coils of cable or conduit, generally under 1000' in length. They can be operated individually or be remotely controlled as auxiliary equipment in a process line.


Coil winders

Calmec Precision Ltd

Conduit Machines


Conduit Machines are used for the continuous production of flexible square profile and fully interlocked conduit, for steel, stainless steel, and aluminum. They can produce a wide variety of round conduit up to 4 1/2" in diameter, and as small as 1/2" in diameter. CALMEC produces 2” and 4” machines, with a 6” machine in development, at speeds up to 1200 RPM.


Conduit Machines

Calmec Precision Ltd

Measuring Units


CALMEC produces both belt and wheel style length measuring units in different sizes. Measuring can be done bi-directionally with various formats. All units have encoder feedback to a pre-determined counter, which can be programmed to suit the customer's requirements. All belts/wheels to product contact can be either weight set or pneumatically pressure adjustable. Height adjustment is permissible on all pedestal units.


Measuring Units

Calmec Precision Ltd

Spoolers


Spoolers are usually designed to accommodate a single small size reel. They are usually designed for higher speed winding of small sized products, where an accurate traverse is required to provide good winding. They are usually the most automated style of take-up, with servo controls for traversing.. Size Range: 12"-36" diameter Speed Range: 100-1000 FPM Maximum Reel Weight: 100 - 2000 lbs Drive Type: AC or DC geared motor


Spoolers

Calmec Precision Ltd

Take-Ups


CALMEC has a wide range of take-ups to suit most requirements. From the smaller spoolers to the large roll through bridge type machines, CALMEC offers a great selection of styles. Choosing which style is best for your application involves deciding what products are to be run on the unit, the size range of product, the line speed range, the floor space available, as well as budget.


Take-Ups

Calmec Precision Ltd

Taping Machines


Taping machines are used for continuous constant tension taping of multiple tape materials over cables.


Taping Machines

Calmec Precision Ltd

Wire and cable armoring machines


Armoring Machines are used for the production of flex pipe conduit and armored cables. They can produce a wide variety of flat or round armor as large as 4" in diameter, and as small as 1/4" in diameter. CALMEC produces 1 ¼” 2” and 4” machines, at speeds up to 1400 RPM.


Wire and cable armoring machines

Calmec Precision Ltd

Coil fed punching machines


DALCOS – Dallan coil punching division. Punching machines Dalcos: coil fed lines for fast, flexible and parametric production. DALCOS is the Dallan division specialised in the manufacture of coil punching machines (automatic coil punching machines), flexible punching lines and coil fed laser cutting systems. As a result of the growing demand for flexible systems, in 1989 Dallan establishes Dalcos as an independent unit focusing on the production of these...


Coil fed punching machines

Dallan Spa

DALLAN Services


Services. From the first technical consulting to the 360° service for your Dallan machines Investing in a Dallan system allows our customers to enjoy a wide range of services, starting from consulting our specialists for the study and design of your product. Once built the machine, line or plant...


DALLAN Services

Dallan Spa

Dallan Technology


Dallan Technology. First Class Product design, Lean concepts, Software: details that make the difference. Our machines resemble our organization: there are details that make all the difference and ensure that our customers continue to come back to us. Long-lasting sturdiness, continuity of service and great user friendliness...


Dallan Technology

Dallan Spa

Premium Apps


DALLAN experience and specialization for your best result Dallan premium applications are making history in roll forming and production systems. The following links will show you the potential of all our technologies, in the form of special lines for the production of high quality finished products, starting from the raw material.


Premium Apps

Dallan Spa

Professional roll forming lines


DALLAN Professional roll forming lines. Ideal when high flexibility and output are a must. The DALLAN rollforming lines combine several machines for carrying out different processes on sheet metal. One example of a DALLAN roll forming line is the well known production system for foam-filled aluminum rolling shutters, which...


Professional roll forming lines

Dallan Spa

Narrow your results
X

Testimonials

Alberto Gabika, Heroslam - Spain: "Expometals is a great marketing partner for us. The staff is proactive and helpful and the exposure of our brand has improved since we started to work with them."

René Branders, FIB Belgium s.a. - Belgium: “We have been online for a few years and are very satisfied with Expometals. The Google ranking from their website is excellent. The platform is simple to manage and efficient!”

Pietro Tocchetti, Cometo S.n.c. - Italy: “We received several requests for quotation through the portal, and more than one brought to a successful conclusion.”

Cristian Saraceno, Tramev S.r.l. - Italy: “For a company pursuing internationalization, Expometals is an effective tool, as it allows to increase the visibility in the whole world.”

Follow us on




Compatible with

Numbers in real time

250,365 annual visits
11,707 news since 2002
70,089 e-mail records
7,641 companies
343 online exhibitors
3,812 products

Contact us

Headquarters
via Manzoni 75 - 23868 Valmadrera (LC) Italy
Tel.: +39 0341 580139
Mobile: +39 349 8385199
Skype: expometals
E-mail: staff@expometals.net