Search the product you need.
Covered sectors: wire - tube - fasteners - springs - coils and related fields.

Use filters to narrow your search results. Filter options appear on the right of your results. Click on a filter to apply it to your search. You can filter the results by selecting one or more product category and/or by nations
If you don't find what you're looking for, write an e-mail to staff@expometals.net, and we'll do our best to put you into contact with the right companies.

In-line measurement of squared and rectangular cross sections


QUADRALINE is a Laser System designed for the on-line control of the two dimensions of extruded or rolled products featuring rectangle-like cross section. Due to its special features, Quadraline guarantees reliable and accurate measurements without the need for a tight alignment and tolerates product vibration and twisting.


In-line measurement of squared and rectangular cross sections

AEROEL Srl

Intelligent Laser Sensors - Xploreline


The XLS gauges are programmed with a dedicated software and are completed with a display unit and a remote control: using such a measuring “system” you can monitor the diameter on-line, measuring fast moving products very accurately, to achieve 100% check and to avoid any dimensional non-conformity.


Intelligent Laser Sensors - Xploreline

AEROEL Srl

Intelligent Laser Sensors for diameter, roundness and the concentricity - Table-gauge


Use the Xactum Intelligent Laser Gauges as bench-top micrometers, in the Table-Gauge configuration: with no other instrument can you measure diameters so quickly, so accurately and so easily.


Intelligent Laser Sensors for diameter, roundness and the concentricity - Table-gauge

AEROEL Srl

Laser Measuring System for extruded products


EXTRULINE Laser Measuring Systems are particularly suitable for the diameter control of extruded products such as plastic tubing, sections, electric cables and other similar products.


Laser Measuring System for extruded products

AEROEL Srl

Laser Measuring Systems for bar and tubes


BARLINE Laser Measuring Systems are particularly suitable for the diameter control of ground bars or drawn metallic tubes. Thanks to a perfect balance between straightforward operation, reliability and advanced performance, BARLINE Systems represent today’s ideal solution for process automation and quality control.


Laser Measuring Systems for bar and tubes

AEROEL Srl

Laser micrometer for full carbide tools and blanks checking


MECLAB TOOL is a family of laser instruments to check full carbide tools and blanks, perfect to measure tools with odd or even cutting edges. Ideal for off-line inspection and quality control.


Laser micrometer for full carbide tools and blanks checking

AEROEL Srl

Quality control laser gauge


MECLAB is an accurate and flexible instrument suitable for measuring the diameter of cylindrical components, shafts rubber rollers, turned or ground components, hard metal tools.


Quality control laser gauge

AEROEL Srl

2 Axis Wire Forming & Welding Machines ultimat UMW


Six standard models for processing wire ranging from 2.00 mm up to 16.00 mm and with maximum frame sizes ranging from 1000 x 1000 to 1600 x 1600mm.


2 Axis Wire Forming & Welding Machines ultimat UMW

Ultimate Automation Ltd

2 Axis Wire Forming Machines ultimat UME


Four standard models for processing wire ranging from 2.00 mm up to 10.00


2 Axis Wire Forming Machines ultimat UME

Ultimate Automation Ltd

Automatic Ring Forming & Welding Machines ultimat URW


Four standard models for processing wire ranging from 2.00 mm up to 10.00mm. Working direct from coil the URW, forms, cuts and weld the rings fully automatically.


Automatic Ring Forming & Welding Machines ultimat URW

Ultimate Automation Ltd

Automatic Ring Forming & Welding Machines ultimat UTW


Designed for the automatic production of butt welded rings.


Automatic Ring Forming & Welding Machines ultimat UTW

Ultimate Automation Ltd

Cross wire welding machine ultimat UCW


Four standard models for processing wire ranging from 2.00 mm up to 10.00


Cross wire welding machine ultimat UCW

Ultimate Automation Ltd

Diamond die polishing equipment


The Machine is manufactured with precision engineering and especially consists of self centering oscillating type die holder and reciprocating wire clamping device. Die rotation and stroke speeds are continuously variable. Individual controls are provided for die rotation, stroke and oscillation


Diamond die polishing equipment

Mikrotek Machines Ltd.

Diamond Paste


Diamond Paste is used for cutting and polishing of TC dies. Diamond Paste is readily available in standard packing of 20 grams syringe


Diamond Paste

Mikrotek Machines Ltd.

Diamond Powders


Mikrotek diamond powders are excellent and not matched by any other for quick cutting and polishing of dies with lowest RA value. They are tightly graded to ensure uniform and excellent polishing quality surface while working on dies.


Diamond Powders

Mikrotek Machines Ltd.

Diamond Suspension


Mikrotek diamond suspension is well known for quick cutting and polishing of TC dies. Specially graded diamond powders are mixed with unique gel liquid to suspend the diamond particles uniformly throughout the liquid adds value in quick cutting and high polishing of TC dies.


Diamond Suspension

Mikrotek Machines Ltd.

Die inspection equipment


The instrument is designed and developed for quick checking of die bore sizes with the help of an optical image and customised measuring software.


Die inspection equipment

Mikrotek Machines Ltd.

Die reconditioning services


The efficiency of the wire plant, wire surface, size & roundness of the wire is directly dependent on the condition of the string of dies. After many kilometers of wire drawing, a "wear ring" is formed at the contact point in the die profile. At this point, the dies need repolishing to retain the original die profile and roundness. Repolishing will bring backthe die life...


Die reconditioning services

Mikrotek Machines Ltd.

Hard metal drawing dies and tapered inserts


We offer Tungsten carbide dies in the size range from 0.200 to 30 mm for wire, rod, bar & tube drawing. We use the best quality of tungsten carbide nibs purchased from reputed companies for various drawing applications. Our high speed state of the art equipment ensures that each die is perfectly grinded, concentric and mirror polished.


Hard metal drawing dies and tapered inserts

Mikrotek Machines Ltd.

Measuring Pin Sets


Mikrotek offers quick, efficient and economical way of checking the die bores using measuring pins in step of 10, 20 & 50 microns. These pins are hardened and treated to maintain the diamensions for a prolonged life. the size is either marked on the pins or the pins are placed in a plastic container and then these are supplied in an engraved polished wooden boxes.


Measuring Pin Sets

Mikrotek Machines Ltd.

Natural and single diamond dies


We manufacture Natural diamond dies in the size range of 0,010- 1,200 mm. We use Kimberly Process certified rough diamond stones. Every diamond stone is individually inspected under polarised Microscope and only flawless Diamonds are selected. The rough diamonds are flattened with respect to 111 plane orientation to give every die maximum strength to withstand rough & tough drawing conditions and maximum number of recuts.


Natural and single diamond dies

Mikrotek Machines Ltd.

Polycrystalline and SMP dies


We manufacture Polycrystalline diamond dies in the size range of 0.025–32 mm. PCD blanks are available in 2 types - Self supported and Tungsten ring supported. Also different grain sizes (1,3, 5, 10, 25 & 50 microns) are available . The PCD blanks are purchased from well known manufacturers mainly M/s Sandvik Hyperion (Formerly Diamond Innovations / GE), M/s Sumitomo & SF diamonds etc.


Polycrystalline and SMP dies

Mikrotek Machines Ltd.

Polycrystalline enameling dies


We manufacture PC enameling dies with Diamond insert from 0.200 to 6.00 mm. Perfect inner profile allows smooth and continuous flow of enamel on the copper wire and ensures uniform coating. Mikrotek offers standard and customised design in both Stainless Steel and Aluminum bodies.


Polycrystalline enameling dies

Mikrotek Machines Ltd.

3D Eyepiece-less Inspection Microscope


Mantis Elite is an ergonomic eyepieceless stereo microscope, offering superb optical performance with magnification options up to 20x, making it a perfect alternative to more traditional inspection stereo microscopes. 2x - 20x magnification Long working distance and large field of view Superb hand-eye co-ordination for inspection and manipulation tasks


3D Eyepiece-less Inspection Microscope

Vision Engineering Ltd.

3D Visual Inspection Microscope - Mantis


Mantis Compact is an ergonomic, low fatigue visual inspection microscope, excelling in the low magnification range for inspection tasks where bench magnifiers have traditionally been used. 2x - 8x magnification Long working distance Superb hand-eye co-ordination for inspection and manipulation tasks


3D Visual Inspection Microscope - Mantis

Vision Engineering Ltd.

Automated Optical & Video Measuring Microscope


Hawk Duo CNC provides ultimate control, quality and flexibility for accurate measurement of precision components, combining both optical and video measuring technologies in a fully automated CNC controlled system. Measuring range up to 200mm x 150mm Dynascope™ optical microscope technology offers unrivalled image clarity, making accurate measurements easy. Integrated video measurement offers ultimate power and flexibility.


Automated Optical & Video Measuring Microscope

Vision Engineering Ltd.

Automated Vision Measuring Machine


A highly capable programmable and compact 3-axis non-contact vision measuring machine, Falcon CNC delivers accurate results with simplicity making it a cost-effective automated measuring system, perfect for small precision parts and increasing throughput. Measuring range 150mm x 150mm. Powerful and intuitive, delivering accurate results with confidence. Impressive repeatability and reproducibility.


Automated Vision Measuring Machine

Vision Engineering Ltd.

Narrow your results
X

Testimonials

Alberto Gabika, Heroslam - Spain: "Expometals is a great marketing partner for us. The staff is proactive and helpful and the exposure of our brand has improved since we started to work with them."

René Branders, FIB Belgium s.a. - Belgium: “We have been online for a few years and are very satisfied with Expometals. The Google ranking from their website is excellent. The platform is simple to manage and efficient!”

Pietro Tocchetti, Cometo S.n.c. - Italy: “We received several requests for quotation through the portal, and more than one brought to a successful conclusion.”

Cristian Saraceno, Tramev S.r.l. - Italy: “For a company pursuing internationalization, Expometals is an effective tool, as it allows to increase the visibility in the whole world.”

Follow us on




Compatible with

Numbers in real time

250,365 annual visits
11,707 news since 2002
70,089 e-mail records
7,641 companies
343 online exhibitors
3,812 products

Contact us

Headquarters
via Manzoni 75 - 23868 Valmadrera (LC) Italy
Tel.: +39 0341 580139
Mobile: +39 349 8385199
Skype: expometals
E-mail: staff@expometals.net