Search the product you need.
Covered sectors: wire - tube - fasteners - springs - coils and related fields.

Use filters to narrow your search results. Filter options appear on the right of your results. Click on a filter to apply it to your search. You can filter the results by selecting one or more product category and/or by nations
If you don't find what you're looking for, write an e-mail to staff@expometals.net, and we'll do our best to put you into contact with the right companies.

Coldside® super-compact hard metal coating


It is a top quality super-compact hard metal (HIP), based on special tungsten carbides and other special minerals. It is particularly suitable in the coating of mechanical parts used in the drawing industry for ferrous and non-ferrous metal wires, with the purpose of reducing their wear and friction.


Coldside® super-compact hard metal coating

PAGANONI (Division of MARIO NAVA SPA)

Kerblack® chrome oxide-based coating


This is a highly specialised chrome oxide-based coating, developed by our laboratory after years of research and practical experience with the most important wiredrawing factories. KERBLACK® is considered...


Kerblack® chrome oxide-based coating

PAGANONI (Division of MARIO NAVA SPA)

Kersint® super-sintered ceramic material


This is a super-sintered ceramic material made of zirconium oxide and rare minerals. The wear of the acid-resistant KERSINT ® rings is practically NEGLIGIBLE, with consequent considerable reduction of service and downtime.


Kersint® super-sintered ceramic material

PAGANONI (Division of MARIO NAVA SPA)

Niksint® nickel coating for wires, tubes etc.


Niksint® is the coating that is obtained by depositing a layer of nickel for wear-resistant applications with excellent anti-corrosion properties, suitable for in-line annealing of copper wires, and for the coating of tubes for annealing surfaces.


Niksint® nickel coating for wires, tubes etc.

PAGANONI (Division of MARIO NAVA SPA)

Renovation service for wire-drawing machines equipment


We offer our customers all over the world our service for the renovation of their worn-out capstans. This service consists in recovering the geometry of those parts that are worn-out because of the contact with wire and treating the surface with either KERBLACK ® WOLSIDE ® or COLDSIDE ® coatings.


Renovation service for wire-drawing machines equipment

PAGANONI (Division of MARIO NAVA SPA)

Wolside® "melted" super-compact hard metal coating


Wolside® is a top quality “melted” super-compact hard metal (HIP), based on special tungsten carbides and other special mineral compounds. It is particularly suitable in the coating of mechanical parts used in the drawing...


Wolside® "melted" super-compact hard metal coating

PAGANONI (Division of MARIO NAVA SPA)

Belt descalers


PAN ENGINEERING > Belt descalers: high efficiency single head orbital belt descaler.


Belt descalers

PAN CHEMICALS S.p.A.

Brushes for descaling and cleaning


Helical brushes for cleaning steel wires and profiles


Brushes for descaling and cleaning

PAN CHEMICALS S.p.A.

Calcium based lubricants for dry drawing


Lubricants designed for all customers' needs: high or low residual, high lubricity, specific grain sizes and different melting points.


Calcium based lubricants for dry drawing

PAN CHEMICALS S.p.A.

Charcoals for galvanising


Additivated products to provide good wiping properties, long life, very low fumes.


Charcoals for galvanising

PAN CHEMICALS S.p.A.

Combined dry drawing lubricants


Calcium-sodium lubricants, used in dry-drawing operations.


Combined dry drawing lubricants

PAN CHEMICALS S.p.A.

Degreasing agents for wire


Degreasing agents to be used on the annealed wires before phosphate coating, before the final coating and painting operations; for dipping and spraying operations.


Degreasing agents for wire

PAN CHEMICALS S.p.A.

Die reconditioning equipment


Die reconditioning equipment: for high productivity of tungsten carbide die.


Die reconditioning equipment

PAN CHEMICALS S.p.A.

Emulsifiable drawing lubricants


Emulsifiable drawing lubricants for wet drawing operations on copper or galvanized wires.


Emulsifiable drawing lubricants

PAN CHEMICALS S.p.A.

Fluxes for galvanizing processes


PANFLUX > Fluxes for galvanizing: Product for preparation of fluxing bath for galvanizing and Al-Zn hot dip coating


Fluxes for galvanizing processes

PAN CHEMICALS S.p.A.

Inhibitors for acid pickling


Products for hydrochloric and sulphuric acid pickling.


Inhibitors for acid pickling

PAN CHEMICALS S.p.A.

Mechanical descalers


Mechanical descalers are designed and manufactured to be used in combination with our rotating pressure die boxes, pressure dies and lubricants to attain the highest speed performance.


Mechanical descalers

PAN CHEMICALS S.p.A.

Neutralizing and anti-corrosion chemicals


Products to prevent oxidation, provide bright finish, passivation for long shelf life of the pickled product, anti-corrosion properties and good feedability through welding gun.


Neutralizing and anti-corrosion chemicals

PAN CHEMICALS S.p.A.

Non-reactive coatings for stainless and carbon steel


Non-reactive coatings for high carbon steel wire drawing and cold heading, steel bars, tubes and profiles drawing...


Non-reactive coatings for stainless and carbon steel

PAN CHEMICALS S.p.A.

Pastes and greases for wet drawing


Pastes and greases for wet drawing, designed for specific applications, to leave a minimal residue.


Pastes and greases for wet drawing

PAN CHEMICALS S.p.A.

Phosphate coatings


Products for general application during cold heading, for high and low carbon steel wire. Suitable for oil and dry lubrication. They can be used either for batch or in-line operations.


Phosphate coatings

PAN CHEMICALS S.p.A.

Polymeric coatings for surface preparation


Polymeric coatings for cold heading applications and bar drawing.


Polymeric coatings for surface preparation

PAN CHEMICALS S.p.A.

Polymeric dry drawing lubricants


An innovative solution for the operations of cold forming (drawing, extrusion, …), of steel and low alloyed steel, of stainless steel wire, galvanized wire and aluminium.


Polymeric dry drawing lubricants

PAN CHEMICALS S.p.A.

Rotating die boxes


Rotating dies greatly improve lubrication, performance, die life and wire quality. A complete range of rotating die holders covers all die sizes and applications. Pan Chemicals rotating die boxes are: motor-driven, direct water cooled, suitable for single and pressure dies. Special double die boxes for plating quality wire.


Rotating die boxes

PAN CHEMICALS S.p.A.

Sodium based dry drawing lubricants


A wide range of borax free or low borax lubricants for all the wire productions. Perfect for low carbon and high carbon steel.


Sodium based dry drawing lubricants

PAN CHEMICALS S.p.A.

Soluble drawing oils


Wet drawing operations require a balance between lubricity and degreasing. Pan Chemicals offers a wide range of solutions.


Soluble drawing oils

PAN CHEMICALS S.p.A.

Special lubricants for rolling


Lubricants for rolling operations after mechanical descaling, brushing, belt descaling with or without coating.


Special lubricants for rolling

PAN CHEMICALS S.p.A.

Narrow your results

Testimonials

Alberto Gabika, Heroslam - Spain: "Expometals is a great marketing partner for us. The staff is proactive and helpful and the exposure of our brand has improved since we started to work with them."

René Branders, FIB Belgium s.a. - Belgium: “We have been online for a few years and are very satisfied with Expometals. The Google ranking from their website is excellent. The platform is simple to manage and efficient!”

Pietro Tocchetti, Cometo S.n.c. - Italy: “We received several requests for quotation through the portal, and more than one brought to a successful conclusion.”

Cristian Saraceno, Tramev S.r.l. - Italy: “For a company pursuing internationalization, Expometals is an effective tool, as it allows to increase the visibility in the whole world.”

Follow us on




Compatible with

Numbers in real time

239,417 annual visits
12,122 news since 2002
70,489 e-mail records
7,645 companies
346 online exhibitors
3,840 products

Contact us

Headquarters
via Manzoni 75 - 23868 Valmadrera (LC) Italy
Tel.: +39 0341 580139
Mobile: +39 349 8385199
Skype: expometals
E-mail: staff@expometals.net