Search the product you need.
Covered sectors: wire - tube - fasteners - springs - coils and related fields.

Use filters to narrow your search results. Filter options appear on the right of your results. Click on a filter to apply it to your search. You can filter the results by selecting one or more product category and/or by nations
If you don't find what you're looking for, write an e-mail to staff@expometals.net, and we'll do our best to put you into contact with the right companies.

Manual hydraulic cutting tools for copper, aldrey, aluminum, aluminum-steel cables, steel ropes and steel ground rod


Hand operated hydraulic tool specifically designed to cut Copper, Aldrey, Aluminum, Aluminum-Steel cables, steel ropes having a max overall diameter of1”, guy wire up to 7/8” and steel ground rod up to 5/8”.


Manual hydraulic cutting tools for copper, aldrey, aluminum, aluminum-steel cables, steel ropes and steel ground rod

Cemanco L.C.

Payoff with magnetic brake and adjustable tension control


Payoff equipped with hysteresis brake with adjustable tension control. Spool shaft bearings on both sides.


Payoff with magnetic brake and adjustable tension control

Cemanco L.C.

Pneumatic cable cutter heads for copper and aluminum cables


A pneumatic cutting head specifically designed for cutting copper and Aluminum cables having overall diameter up to 3-3/4″.


Pneumatic cable cutter heads for copper and aluminum cables

Cemanco L.C.

Pneumatic cutting heads for copper, aluminum and telecommunications cables


This tool is specifically designed to cut copper, aluminum and telecommunications cables having a max overall diameter up to 2". The blades are manufactured from high strength special steel, heat treated to ensure a long service life. The head can be easily opened to allow the cutting of running cables.


Pneumatic cutting heads for copper, aluminum and telecommunications cables

Cemanco L.C.

Programmable autowinder for high quality coils and coils of different shapes


The KMK rewinder is a programmable autowinder and particularly suitable for high quality coils and coils of different shapes as well as for short set-up. It can easily handle fine wires made of copper or steel.


Programmable autowinder for high quality coils and coils of different shapes

Cemanco L.C.

Rewinder modular system with mechanical gearbox


Rewinder with electronic speed control, preselectable length counter with automatic stop and wire tension control, usable for different spool shapes and sizes.


Rewinder modular system with mechanical gearbox

Cemanco L.C.

Six roller check station guide


Headquartered in Pompano Beach, Florida USA, Cemanco LC. supplies six roller check station guides for laser counters, etching, or quality assurance systems.


Six roller check station guide

Cemanco L.C.

Solid tungsten carbide ring guides and buncher guides


Tungsten carbide alloys provide a long lasting, wear-resistant option and are two to three times more rigid than steel. The material has a very high resistance to deformation and deflection and its impact resistance is as good as that of some hardened tool steels.


Solid tungsten carbide ring guides and buncher guides

Cemanco L.C.

Spooling traverse options


With multiple options available you can customize your spooling traverse to fit your specific application. The line guide, shown above mounted on top of the unit, keeps the line moving smoothly without binding or skipping.


Spooling traverse options

Cemanco L.C.

Tungsten carbide coatings on steel and aluminum parts


Ferrous wire and cable production requires wear parts that can stand up to the hardness of ferrous materials and tungsten carbide has been the choice of the industry. We have taken our same attention to detail and quality that we give to our ceramics and applied them to tungsten carbide.


Tungsten carbide coatings on steel and aluminum parts

Cemanco L.C.

Wire straighteners from 0.5mm to 40mm


Cemanco, specializing in solutions and products for the Wire, Cable, Textile & Automotive industries, sells wire straighteners from 0.5mm to 40mm...


Wire straighteners from 0.5mm to 40mm

Cemanco L.C.

Back-twisting strips conveyor


This machine conveys and put in tension the strips. It is installed between the stranding cage and the transposer and rotates in synchronization with the cage. The strips pass through tubular guides, converging to the center line and are kept in planar position. Two jaws, with an inteposed layer of felt, give them the necessary tension...


Back-twisting strips conveyor

Proteco srl

Bobbin servo-loader


Proteco, specializing in the production of CTC machines, can supply bobbin servo-loaders.


Bobbin servo-loader

Proteco srl

Caterpillar pulling unit


The machine is composed of a rigid frame holding the pulling group that can rotate 90° around its longitudinal axis to clamp the cable from top or side, depending on which condition is more effective. The cable is pressed between and pulled by two reinforced wear-resistant belts. The clamping pressure is given by pneumatic pistons through groups of swinging rollers...


Caterpillar pulling unit

Proteco srl

Meter counter


Proteco, specializing in the production of CTC machines, can supply meter counters.


Meter counter

Proteco srl

Modular stranding cage for CTC


Modular cage stranding machine. The stranding cage is a modular structure made of disks connected through a central tube holding 8 or 10 bobbins, depending on the type. It is supported by idle wheels. The bobbins are loaded on cradles shaped as open forks and clamped by pneumatic tailstocks. The axis of rotation of the forks is convergent to the center line to minimize the angular deviation of the strips...


Modular stranding cage for CTC

Proteco srl

Portal Take-up for cables


This take-up is a portal type self-traversing on rails by means of a servo motor for a precise winding of the cable. The reversing position is controlled by an encoder and protected by limit switches. The bobbins are clamped by tailstocks that can close/open and move...


Portal Take-up for cables

Proteco srl

Preforming machine for Ventilated CTC


This machine bends the strips in the vertical plane to get a slot in the middle height of the CTC through its whole length. This slot increases the thermal exchange between copper and coolant by introducing an additional surface...


Preforming machine for Ventilated CTC

Proteco srl

Short circuit tester


Proteco, specializing in the production of CTC machines, can supply short circuit testers.


Short circuit tester

Proteco srl

Taping machine for rectangular and round cables


Compact configuration, with tape pads disposed in parallel-radial distribution precise tensioning of the tapes made by electromagnetic brake settings and adjustments fully controlled from the control panel precise and...


Taping machine for rectangular and round cables

Proteco srl

Transposing machine for CTC


The machine operates according to a new transposing principle that makes use of rollers for displacing the strips from one stack to the other. This innovative principle allows a very smooth, precise and fast bending shape without...


Transposing machine for CTC

Proteco srl

6 lobe (TX) one piece punches


Universal Punch Corporation, leader in the tooling and gauging industry, produces and sells 6 lobe (TX) one piece punches.


6 lobe (TX) one piece punches

Universal Punch Corp.

6-lobe (TX) go/no-go socket gages


Universal’s Gages are heat treated, thermally stabilized, and surface treated. This provides additional hardness for maximum wear. Gage probes are calibrated to dimensions and tolerances as specified and are traceable to the National Institute of Standards and Technology.


6-lobe (TX) go/no-go socket gages

Universal Punch Corp.

6-lobe (TX) socket punches


Universal Punch Corporation, leader in the tooling and gauging industry, produces and sells hexalobular (TX) socket punches .


6-lobe (TX) socket punches

Universal Punch Corp.

6-lobe external gages


Universal’s Gages are heat treated, thermally stabilized, and surface treated. This provides additional hardness for maximum wear. Gage probes are calibrated to dimensions and tolerances as specified and are traceable to the National Institute of Standards and Technology.


6-lobe external gages

Universal Punch Corp.

6-lobe external punches


Universal Punch Corporation, leader in the tooling and gauging industry, produces and sells hexalobular external punches.


6-lobe external punches

Universal Punch Corp.

6-lobe internal punch pins


Universal Punch Corporation, leader in the tooling and gauging industry, produces and sells 6-lobe internal punch pins.


6-lobe internal punch pins

Universal Punch Corp.

Narrow your results

Testimonials

Alberto Gabika, Heroslam - Spain: "Expometals is a great marketing partner for us. The staff is proactive and helpful and the exposure of our brand has improved since we started to work with them."

René Branders, FIB Belgium s.a. - Belgium: “We have been online for a few years and are very satisfied with Expometals. The Google ranking from their website is excellent. The platform is simple to manage and efficient!”

Pietro Tocchetti, Cometo S.n.c. - Italy: “We received several requests for quotation through the portal, and more than one brought to a successful conclusion.”

Cristian Saraceno, Tramev S.r.l. - Italy: “For a company pursuing internationalization, Expometals is an effective tool, as it allows to increase the visibility in the whole world.”

Follow us on




Compatible with

Numbers in real time

237,045 annual visits
12,267 news since 2002
70,536 e-mail records
7,645 companies
346 online exhibitors
3,846 products

Contact us

Headquarters
via Manzoni 75 - 23868 Valmadrera (LC) Italy
Tel.: +39 0341 580139
Mobile: +39 349 8385199
Skype: expometals
E-mail: staff@expometals.net