Automatic feeders for blind rivets and rivet nuts: more productivity, more safety

Make efficiency automatic with RIV606, the automatic feeder for blind rivets and RIV616, the automatic feeder for rivet nuts and turn your riveting operations into a time-saving work.

The reduction in the riveting time is an essential goal for the industrial activity. This is why Rivit projected a pneumatic/electric unit, that loads the rivet or the rivet nut directly on the head of the riveting tool: its use halves the installation time and eliminates, in the loading phase, the contact between the operator’s hand and the body of the fasteners, assuring more productivity and higher safety.

RIV606 is an automatic feeder for standard blind rivets from d.2.4 to d.6.4 mm and it can be used with tools with mandrel suction, such as models RIV502/RIV503/RIV505.

RIV616 is an automatic feeder for rivet nuts from M3 to M8 with cylindrical or hexagonal shank, with dome, reduced or countersunk head. RIV616 can be used with tools as RIV938, RIV912 and RIV941 model.

The comprehensive range of Rivit's tools is available on www.rivit.it.

Watch the videos on Youtube Rivit Channel.

RIV606 https://www.youtube.com/watch?v=qZ_gBFibFvk 
RIV616 https://www.youtube.com/watch?v=R7UzuBjZAfQ

TECHNICAL DATA RIV606
Dimensions (width x depth x height): 340x530/630x300 mm
Voltage: 220 V -  50 Hz
Installed power: 100 W
Weight: 34 Kg

Download the complete technical data sheet here.

TECHNICAL DATA RIV616
Dimensions (width x depth x height): 340x530x300 mm
Voltage: 220 V - 50 Hz
Air pressure: 2/4 bar
Weight: 32 Kg

Download the complete technical data sheet here.