The online magazine for the metal manufacturing and processing. The news of the online exhibitors and the industry reports.

Latest news   

High-speed wire polishing: up to 25 m/s with the new Vassena cleaning device


Published:18/01/2017
High-speed wire polishing: up to 25 m/s with the new Vassena cleaning device

Easy to use and affordable, this wire cleaning device requires no maintenance and it is able to clean the surface of wire at a speed...

Read news

FIB premix combustion equipment for the heating of a general galvanizing furnace


Published:18/01/2017
FIB premix combustion equipment for the heating of a general galvanizing furnace

FIB BELGIUM is proud to announce you the installation of a FIB premix combustion equipment for the heating of a general galvanizing...

Read news

World premieres. The new RP120 & RP220 with starter unit driven by Torque motor


Published:18/01/2017
World premieres. The new RP120 & RP220 with starter unit driven by Torque motor

The Sacma Group would like to invite you to the Fastener Fair Stuttgart 2017 being held March 28 to 30, 2017. This exhibition...

Read news

The events to attend in February 2017


Published:18/01/2017
The events to attend in February 2017

After Christmas holidays, we are back with another issue of our column concerning the fairs of next month.

Read news

CAN-ENG contracted to build a continuous T-7 heat treatment system in EU


Published:18/01/2017
CAN-ENG contracted to build a continuous T-7 heat treatment system in EU

CAN‐ENG Furnaces International Limited has been contracted by a European leader in the design and development of Light Weighting...

Read news

Eurodraw: used dry drawing machine available


Published:17/01/2017
Eurodraw: used dry drawing machine available

Eurodraw proposes a used 7 block dry drawing machine with the following specifications...

Read news

Bongard is looking for steel spools - and proposing rolling lines, stranders, drawing machines...


Published:17/01/2017
Bongard is looking for steel spools - and proposing rolling lines, stranders, drawing machines...

This month, January 2017, Bongard is looking for DIN 630 steel spools on behalf of some customers. Check out the details below.

Read news

Machinery for precious metals, Violi to participate in T-Gold


Published:16/01/2017
Machinery for precious metals, Violi to participate in T-Gold

On January 20-25, Violi Srl will participate in T-Gold, the most important showcase in the world of technology applied to the...

Read news

Turned parts manufacturer Bama Viti ends 2016 with two important pieces of news


Published:16/01/2017
Turned parts manufacturer Bama Viti ends 2016 with two important pieces of news

Bama Viti, Italian company specializing in the production of unified and special turned parts, is proud to communicate two important...

Read news

Eurolls hi carbon wire production lines


Published:15/01/2017
Eurolls hi carbon wire production lines

In today’s world, the word progress has also become synonymous with expectations of better quality. In the sector of high carbon steel wire...

Read news

Packaging machines specialist Weighpack to attend Fastener Fair Stuttgart 2017


Published:12/01/2017
Packaging machines specialist Weighpack to attend Fastener Fair Stuttgart 2017

Weighpack, a specialist in development and production of inspection and weighing machines as well as complete packaging lines for technical...

Read news

Steel wire manufacturer Trafilerie di Valgreghentino renews certifications


Published:12/01/2017
Steel wire manufacturer Trafilerie di Valgreghentino renews certifications

The company Trafilerie di Valgreghentino Spa manufactures steel wire since 1953, always using the most modern technologies.

Read news

Seminar on stamping and fine blanking, Ceratizit to present innovative solutions


Published:11/01/2017
Seminar on stamping and fine blanking, Ceratizit to present innovative solutions

CERATIZIT Germany is taking part in the stamping and fine blanking seminar from 15-16 March, 2017, at the Technical...

Read news

Cemanco to display quality wear parts and accessories at Interwire 2017


Published:11/01/2017
Cemanco to display quality wear parts and accessories at Interwire 2017

Cemanco LC is proud to inform about the company presence at the upcoming Interwire 2017 show, which will take place in Atlanta...

Read news

Positive outlook for the world car market in 2017


Published:11/01/2017
Positive outlook for the world car market in 2017

The world passenger car market will grow by 2% to around 84 million units in 2017. It was told by Matthias Wissmann, President...

Read news

Condat to present lubricants for cold heading machinery in Stuttgart


Published:10/01/2017
Condat to present lubricants for cold heading machinery in Stuttgart

Among a wide range of lubricants dedicated to the requirements of cold heading machinery, discover CONDAT's new solutions to provide...

Read news

Erre Inox: alloy surcharge values for spring wire and welding wire - January 2017


Published:10/01/2017
Erre Inox: alloy surcharge values for spring wire and welding wire - January 2017

Erre Inox Srl communicates the alloy surcharge values for the month of January 2017 regarding welding stainless steel wire and spring wire.

Read news

New generation multiwire drawing lines unveiled at Niehoff ENDEX Open House


Published:09/01/2017
New generation multiwire drawing lines unveiled at Niehoff ENDEX Open House

For the past twenty years, Niehoff ENDEX North America, Inc. (NENA) has opened its doors to customers and partners for a biennial...

Read news

Steel for the oil & gas industry - Trafilerie San Paolo


Published:09/01/2017
Steel for the oil & gas industry - Trafilerie San Paolo

The Italian wire drawing factory Trafilerie San Paolo manufactures drawn, peeled and rolled steel coils, annealed or hard drawn...

Read news

LC5: one choice, twice the opportunities for sheet and tube laser cutting


Published:02/01/2017
LC5: one choice, twice the opportunities for sheet and tube laser cutting

The LC5 is a combined sheet and tube laser cutting system. Compactness, ergonomics, modularity and versatility: these are the keywords...

Read news

Coil-fed processing: 4 quick formulas for production planning


Published:29/12/2016
Coil-fed processing: 4 quick formulas for production planning

Coil fed processing is a simple and effective way to introduce lean production concepts in sheet metal fabrication: in line production, continuous process...

Read news

Don't miss World of Concrete 2017!


Published:27/12/2016
Don't miss World of Concrete 2017!

World of Concrete is coming soon. Don't miss the show! Schnell waits for you at NORTH HALL - BOOTH N2726 to show you the best and the latest in their rebar fabricating equipment.

Read news

Let’s take stock: Expometals.net in 2016


Published:23/12/2016
Let’s take stock: Expometals.net in 2016

Dear customers and visitors,
2016 is coming to an end, and in line with tradition I take some time to take stock of the evolution of Expometals.net, being myself...

Read news

The Top 5 companies on Expometals.net in 2016


Published:20/12/2016
The Top 5 companies on Expometals.net in 2016

As the end of 2016 approaches, we find ourselves dealing with end-of-the-year reports, like every company does.

Read news

Condoroil presents ELETTRA CPL, a new pickling plant for coils


Published:19/12/2016
Condoroil presents ELETTRA CPL, a new pickling plant for coils

ELETTRA series, designed by Condoroil for the electrolytic pickling of stainless steel, is enriched by model ELETTRA CPL for pickling...

Read news

Newtech enhances international presence by joining Expometals.net


Published:19/12/2016
Newtech enhances international presence by joining Expometals.net

Newtech, incorporated in 2003, works in the field of wires insulation machinery. With partners and the majority of employees...

Read news

Shape wire drawing dies by M&G


Published:19/12/2016
Shape wire drawing dies by M&G

M&G, Italian company operating since 2001 in the production of drawing dies, is proud to present its range of shape dies.

Read news

Rigon presents new electric elongation tester for copper and copper alloys conductors


Published:19/12/2016
Rigon presents new electric elongation tester for copper and copper alloys conductors

Rigon Instruments, Italian company specializing in production of testing equipment for enamelled wire, is proud to present a new electric...

Read news

Have a look at the new camless CNC spring machine MAX CR65


Published:19/12/2016
Have a look at the new camless CNC spring machine MAX CR65

Baudrand New Tech is pleased to present the new camless CNC spring machine MAX CR65...

Read news

Tramev shredder machine for metal banding SR-517


Published:19/12/2016
Tramev shredder machine for metal banding SR-517

The companies that manage large quantities of metal banding know how many problems are linked with the scrapping and disposal...

Read news

Equipment for wire and wire rod: DRT updates presence on the web


Published:19/12/2016
Equipment for wire and wire rod: DRT updates presence on the web

Fully automated pickling for wire rods, sulfuric acid regeneration, automatic handling systems, waste water treatment and much more...

Read news

Turned parts, Bama welcomes a new production manager


Published:18/12/2016
Turned parts, Bama welcomes a new production manager

Bama Viti is happy to welcome a new production manager, Giacomo Lazzaro. “The growth and success of a company both depend on the men that are part..."

Read news

First meeting for the Global Forum on Steel Excess Capacity


Published:18/12/2016
First meeting for the Global Forum on Steel Excess Capacity

The Global Forum on Steel Excess Capacity met for the first time on December 16 in Berlin, at the Federal Ministry of Economics and Energy...

Read news

Lubricants and industrial oils on Kemno's new website


Published:15/12/2016
Lubricants and industrial oils on Kemno's new website

Kemno, Italian company specializing in the production and distribution of lubricants and industrial oils, is proud to present...

Read news

Bongard is looking for drawing lines (and selling stranders, braiders, extruders...)


Published:14/12/2016
Bongard is looking for drawing lines (and selling stranders, braiders, extruders...)

Check out Bongard's December news regarding wire and cable processing machinery and equipment...

Read news

Be a part of Fratom Fastech team: job opportunities in Eastern Europe


Published:12/12/2016
Be a part of Fratom Fastech team: job opportunities in Eastern Europe

The recently founded Fratom Fastech has begun an expansion in the Eastern Europe market, and is looking for skilled independent...

Read news

Sampsistemi acquires Euro Extrusion and Euroalpha in its 80th year


Published:12/12/2016
Sampsistemi acquires Euro Extrusion and Euroalpha in its 80th year

Sampsistemi is proud to announce the recent acquisitions of two reputable Italian companies, Euroalpha and Euro Extrusion.

Read news

Cemanco - quality ceramic wear parts at economy prices


Published:12/12/2016
Cemanco - quality ceramic wear parts at economy prices

Cemanco LC., headquartered in Pompano Beach, Florida USA, develops, manufactures and supplies customers all over the world with solutions...

Read news

A brand new video for Sacma Group


Published:12/12/2016
A brand new video for Sacma Group

SACMA began its existence in 1939 with a small mechanical workshop, in the same place that nowadays houses the modern factory.

Read news

Latest trends in metal heat treating


Published:12/12/2016
Latest trends in metal heat treating

This year's last edition of our column "Latest trends..." focuses on the the heat and surface treatment of metals, mentioning...

Read news
News categories
 
 
 

Testimonials

René Branders, FIB Belgium s.a. - Belgium: “We have been online for two years and are very satisfied with Expometals. The Google ranking from their website is excellent. The platform is simple to manage and efficient!”

Pietro Tocchetti, Cometo S.n.c. - Italy: “We received several requests for quotation through the portal, and more than one brought to a successful conclusion.”

Cristian Saraceno, Tramev S.r.l. - Italy: “For a company pursuing internationalization, Expometals is an effective tool, as it allows to increase the visibility in the whole world.”

Follow us on




Compatible with

Numbers in real time

198,453 annual visitors
8,864 news since 2002
19,946 registered users
6,807 companies
296 online exhibitors
3,115 products

Contact us

Headquarters
via Manzoni 75 - 23868 Valmadrera (LC) Italy
Tel.: +39 0341 580139
Mobile: +39 349 8385199
Skype: expometals
E-mail: staff@expometals.net